IP Subnetting - Part 2 | Subnetting Based on Network Requirement

Channel:
United States Robert Mayer
Subscribers:
6,570
Published on ● Video Link: https://www.youtube.com/watch?v=uZYIAKOSMk4


Duration: 22:08
188 views
5

Part 1: https://youtu.be/bgtXNWh6a7k

This video covers subnetting based on a specific network requirement as well as a recap of part 1

Let's say that you needed to subnet based on a certain number of networks. This video will not only show you how to accomplish this, but will also show you how to find the exact number of hosts the network will be able to contain, the total number of networks available containing that same number of hosts, as well as finding the ip ranges of those subnets.


Timeline:
0:11 - Intro
1:04 - Recap from part 1
8:57 - Part 2: Subnetting based on network requirement



Other Videos By Robert Mayer


2021-06-26Cisco EVN (Easy Virtual Network) Overview and Configuration | CCNP
2021-06-05BGP Default Route Advertisement | 3 Ways to Advertise a Default Route Into BGP on a Cisco Router
2021-05-24HSRP Interface Tracking | Why Track Interfaces in HSRP?
2021-05-22802.1Q Tunneling (Q-in-Q) | Brief Overview and Sample Configuration
2021-05-20Cisco ASA Firewall Active/Standby Failover Configuration
2021-05-03What Is Proxy ARP? | Proxy ARP Example
2021-04-26Spanning Tree Protocol | Root Bridge Election | Port Selection | Why Layer 2 Loops are Undesirable
2021-04-09Configuring a Client to Site IPSec VPN Tunnel on a Cisco ISR Router
2021-03-04How To Configure Dual ISP Failover on a Cisco Router With a Dynamic Public IP Address
2021-01-28IP Subnetting - Part 3 | Reverse Engineering a Subnet Mask | Bitwise AND Operation
2020-12-19IP Subnetting - Part 2 | Subnetting Based on Network Requirement
2020-12-17IP Subnetting - Part 1 | Subnetting Based on Host Requirement
2020-10-29MPLS, VRFs, and Multiprotocol BGP | Basic Configuration
2020-06-25Configuring Cisco Stateful Interchassis Redundancy | NAT & Zone Based Firewall State Synchronization
2020-06-18Configuring "Router on a Stick" | Cisco Networking
2020-06-12Configuring and Explaining HSRP + Interface Tracking | Network Redundancy
2020-06-07Configuring Zone Based Firewall on a Cisco IOS Router | Very Basic Cisco Networking 101 - Part 3
2020-05-30How MAC Addresses Are Managed Using NIC Teaming in Switch Independent Mode on Windows Server
2020-05-29Configuring Multi Homed NAT, IP SLA, and OSPF Default Route Redistribution Using Route Maps
2020-05-28Configuring DHCP on a Cisco IOS Router | Very Basic Cisco Networking 101 - Part 2
2020-05-28Configuring NAT on a Cisco IOS Router | Very Basic Cisco Networking 101 - Part 1


Tags:
ip
subnetting
ip subnetting
cisco
ccna
networks
how to subnet