Making a Rocket Part From Concept to Reality
Channel:
Subscribers:
43,300
Published on ● Video Link: https://www.youtube.com/watch?v=8OuCX1kLuA4
Thought I'd document a side of making rockets that doesn't get a lot of screen time - work-holding, milling errors, etc
Intro - 0:00
Milling Plan - 2:48
Stock Setup - 6:34
First Milling Operation - 19:08
Second Milling Operation - 26:10
Big Sad - 27:34
Fixing the Big Sad - 31:07
Put Headphones On - 32:08
Removing Aft Stock Material - 33:44
Dialing in Nose Shape - 34:22
Polishing the Part - 35:02
Drilling Final Hole - 36:29
Tapping Final Hole - 37:07
Double Checking / Outro - 39:40
Other Videos By Joe Barnard
2023-06-07 | By now, we've built just about the whole motor |
2023-06-06 | Doing The Impossible |
2023-05-30 | This is the 5th in a series of videos |
2023-05-24 | Fixing My Camera - Sony A7 iii Broken Mic Jack |
2023-04-29 | Lawn Care |
2023-04-23 | The Tehachapi Loop |
2023-03-17 | bingggggggggg |
2022-12-24 | candle.mp4 |
2022-12-08 | I am good at making videos |
2022-11-09 | Making A Rocket Part in 2 Minutes |
2022-11-09 | Making a Rocket Part From Concept to Reality |
2022-11-02 | Runcam / Caddx FPV Camera Comparison |
2022-10-31 | POV you are a camera spinner thing and i am testing you on a lathe |
2022-10-28 | Lumineer Raw Onboard Footage |
2022-10-25 | Camera Spinner CNC Part 2 |
2022-10-23 | Camera Spinner CNC |
2022-09-21 | Just Vibing |
2022-09-19 | AVALanche Flight 3 - Sept 17 2022 |
2022-09-19 | Avalanche Flight 2 - August 13 2022 |
2022-08-14 | I Made Peeps Chili with M&M's |
2022-08-08 | AVAlanche Flight 1 - Aug 6 2022 |