Marlin Firmware Tutorial 3d printer (TH3d) for the Creality Cr10s Ender3 Ender printers
20This video walks through the basic configuration of the marlin firmware (TH3d) Version. The base marlin firmware should be very similar.
After you are done with this you will need to flash it, one method for the cr10s is show in another video I made here using octoprint:
https://www.youtube.com/watch?v=EGPToe-j4bk
note: Flashing firmware can brick your printer or require alternate (difficult) flashing methods to recover, proceed at your own risk. This video is purely instructional, but you assume all risk should you follow it.
#marlin
#cr10
#firmware
From wikipedia: https://en.wikipedia.org/wiki/Marlin_(firmware)
Marlin is a open source firmware primarily designed for RepRap project based FDM (Fused Deposition Modelling 3D-printers using the Arduino platform.[1][2][3]
The firmware runs coded commands and instruction sets as a robot software on the 3D printer's control board which manages all of the machine's real-time activities including sending movement coordinates to stepper motors through the stepper drivers, controlling heater elements, sensors, lights, tracking bed levelling, LC displays and buttons.[4] Marlin supports many different boards and many designs of 3D printer robot platforms, including Cartesian (including Core XY), Delta and SCARA printers, as well as some other less conventional designs like Hangprinter.[2][5]
Other than for 3D printing, Marlin is also used for many other kinds of machine including SLA and SLS 3D printers, CNC mills and egg painting robots.[3][6][7]
Marlin Firmware Tutorial 3d printer
TH3d
Creality Cr10s Ender3 Ender printers