Mobius / RuncamHD 360º pan and tilt mount from fpvgadgets.com
Here's a quick update since I haven't flown anything in a little while, and a look at a new pan and tilt mount for the Mobius/RuncamHD. (also holds a flight cam) Hopefully I'll be able to get it in the air soon! Check them out at www.fpvgadgets.com , they should be on sale in the near future one production is complete! .
_____________________________________
Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau Donations are never necessary but always appreciated, and always go directly back into the channel! .
.
https://www.patreon.com/bonafidepirate .
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf __
Patreon: https://www.patreon.com/bonafidepirate
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood - http://bit.ly/piratebgood
eBay - http://ebay.to/2r7k3mb
Amazon - https://www.amazon.com/shop/bonafidepirate
Foxeer - http://www.foxeer.com/?u=499
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf
Other Videos By bonafidepirate
2015-10-15 | FPVGADGETS.COM Propan II Part 1 of 2 (prototype review) |
2015-10-10 | Skywalker 1900 ground recording 10/08/15 |
2015-10-09 | Skywalker FPV Oct. 8, 2015 |
2015-10-04 | FPVMANUALS Delrin Tricopter |
2015-09-23 | Popwing (w/Monkeyblunt) FPV 9/22/15 |
2015-09-18 | ZMR250 FPV 9/17/15 |
2015-09-15 | ZMR250 FPV |
2015-08-17 | Skyhunter FPV Ground Footage August 15 2015 |
2015-06-23 | Part 2 - Mobius / RuncamHD 360º pan and tilt mount from fpvgadgets.com |
2015-06-22 | Suzuki VS800 Intruder |
2015-06-16 | Mobius / RuncamHD 360º pan and tilt mount from fpvgadgets.com |
2015-05-19 | Runcam HD - New F2.8 lens compared to F2.0 lens |
2015-04-22 | ZMR250 FPV |
2015-04-18 | 600mW 5.8GHz Dead! No range! |
2015-04-13 | S500 Frame to carry my gimbal |
2015-04-09 | ZMR, new props |
2015-04-09 | More ZMR stuff... |
2015-04-02 | RuncamHD Low light/Night |
2015-03-25 | ZMR250, BLHeli, Oneshot, Dampened Light, and new firmware on the RuncamHD |
2015-03-23 | ZMR Go Fast! |
2015-03-17 | More ZMR250 Stuff, RuncamHD Video |