NanoPi NEO4 Ultra Small SBC - 6 Core CPU 4 Core GPU USB 3.0 & Type C

Channel:

ETA PRIME

Subscribers:

1,180,000

Published on November 30, 2018 3:26:18 PM ● Video Link: https://www.youtube.com/watch?v=8V_0QZQ6E08

Duration: 11:29

34,877 views

764

In this video, I take a look at the New Nano Pi Neo4 single board computer. This thing is tiny and its powered by the Rock Chip 3399 SOC and backed by 1GB DDR3 1866Mhz Ram.

Learn More Here: https://www.friendlyarm.com/index.php?route=product/product&product_id=241

More RK3399 Review Videos: https://www.youtube.com/watch?v=cuuDpEsDtVw&list=PLm5JownUOeDXD18IOIJqqHudfTc_rtFQe

💙Twitter: https://twitter.com/theetaprime
💙 Become a Patron: https://www.patreon.com/ETAPRIME
💙 Support The Channel: Paypal - http://bit.ly/2gy2ffr
💙 Facebook Group: https://bit.ly/2rkuKPK

Full Specs:
CPU Model: Rockchip RK3399
Number of Cores: big.LITTLE, 64-bit Dual Core Cortex-A72 + Quad Core Cortex-A53
Frequency: Cortex-A72(up to 2.0GHz), Cortex-A53(up to 1.5GHz)
GPU Mali-T864 GPU，supports OpenGL ES1.1/2.0/3.0/3.1, OpenVG1.1, OpenCL, DX11, and AFBC
VPU 4K VP9 and 4K 10bits H265/H264 60fps decoding, Dual VOP, etc
Memory 1GB DDR3-1866
Storage eMMC: no Onboard eMMC, but has a eMMC socket
MicroSD Slot: MicroSD*1 for external storage up to 128GB
Connectivity Ethernet: Native Gbps Ethernet
WiFi: 802.11 b/g/n, Bluetooth 4.0 combo module
Antenna*1: IPX Connector
Audio Audio Output: HDMI
Video Input one 4-Lane MIPI-CSI, up to 13MPix/s
Video Output HDMI*1: HDMI 2.0a, supports 4K@60Hz，HDCP 1.4/2.2
USB USB 3.0*1: USB 3.0 Type-A ports
USB Type-C*1: Supports USB2.0 OTG and Power input
USB 2.0*2: USB 2.0 Host, one is Type-A, the other is 2.54mm header
Pin-header GPIO1: 40pin
2 X 3V I2C, 1x 3V UART/SPI, 1 x SPDIF_TX, up to 8 x 3V GPIOs
PCIe x2
PWM x1, PowerKey
GPIO2:
1 x 1.8V 8ch-I2S
GPIO3:
debug uart, 3V level, 1500000bps
USB 2.0 x1
LED Power LED(Red)*1
GPIO Controlled LED(Green)*1
Others RTC Battery: 2 Pin 2.54mm pitch through-hole pad
Working Temperature: -20℃ to 70℃
Power DC 5V/3A

OS Support Android 7.1.2 (eMMC Module required)
Android 8.1 (eMMC Module required)
Lubuntu 16.04 (32-bit)
FriendlyCore 18.04 (64-bit)
FriendlyDesktop 18.04 (64-bit)
Armbian (3rd)
Kernel version Linux-4.4-LTS
U-boot-2014.10

PCB 8 Layer
Dimension 60*45mm
Weight 30.25g

DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!

THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY! DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video