Odroid H2 PS2 Emulator Test - PCSX2
1,007How well does the new Odroid H2 handle Play STation 2 EMulation using PCSx2 1.4 and 1.5? let's find out!
Ameridroid: https://ameridroid.com/
Buy an H2: https://ameridroid.com/search?type=article%2Cpage%2Cproduct&q=h2*
Amazon Links:
Nvme SSD: https://amzn.to/2QiCUaS
DDR4 Ram: https://amzn.to/2Qh9IRD
WIFI: https://amzn.to/2QKk2ko
Bluetooth Adapter: https://amzn.to/2QKjWt2
Bean Canyon NUC: https://amzn.to/2QhSymZ
💙Twitter: https://twitter.com/theetaprime
💙 Become a Patron: https://www.patreon.com/ETAPRIME
💙 Support The Channel: Paypal - http://bit.ly/2gy2ffr
💙 Facebook Group: https://bit.ly/2rkuKPK
Specifications
Form Factor
Dimensions: 110mm x 110mm x 47mm
Weight: 285 g including heatsink
Processor
Intel Celeron J4105 Processor (14nm, TDP 10W)
Up to 2.5Ghz(Single Thread) or 2.3Ghz(Multi Thread)
4MB L2 Cache
UHD Graphics 600 (Gen 9.5 LP GT1 up to 700MHz)
Fan-less design
Memory
2 x DDR4 1.2V SO-DIMM slots
Dual Channel, up to 2400 MT/s (DDR4-PC19200)
Max memory capacity 32GB
DDR3 is not supported
Storage
1 x eMMC connector (bootable and selectable on BIOS)
Various eMMC modules can be purchased at Hardkernel store
2 x SATA3 6Gbps
1 x M.2 NVMe slot (PCIe 2.0 x 4, supports NGFF-2280 cards)
M.2 SATA SSD is not supported
Networking
2 x GbE LAN ports (RJ45, supports 10/100/1000 Mbps)
Realtek RTL8111G
Supports Wake-On-Lan
LED indicators (Green: Link, Amber: Traffic)
Video
1 x DisplayPort 1.2 (up to 4K@60Hz)
1 x HDMI 2.0 (up to 4K@60Hz)
Dual simultaneous display support
Audio
1 x Audio out (3.5mm jack)
1 x Audio in (3.5mm jack)
1 x SPDIF out (ALC662, HDA codec)
External I/O
2 x USB 3.0 Host ports
2 x USB 2.0 Host ports
1 x Peripheral Expansion Header (20-pin, 2.54mm pitch)
1 x DC 5V, 1 x DC 3.3V, 5 x GND
2 x UART (TXD/RXD/RTS/CTS)
2 x I2C (SCL/SDA)
1 x External Power Button
All 3.3V I/O signal level
Other features
Passive Heatsink
BIOS Backup Battery
Maintains system time and BIOS settings
Power Button
Reset Button
System LEDS Indicators:
Red (PWR) – Solid light when DC power is supplied
Blue (left, ALIVE) – Solid light when System is running
Blue (right, RESET) – When the RESET button is pressed
Amber (SATA) – Flashes when there is data transfer
Green (NVMe) – Flashes when there is data transfer
Active Cooling Fan Connector (5V 4-pin, PWM input + TACHO output)
Active Cooling Fan is optional
Connector (4-pin, 1.25mm pitch)
Power
1 x DC jack : outer (negative) diameter 5.5mm, inner(positive) diameter 2.1mm
DC 14V ~ 20V (up to 60W)
DC 15V/4A power adaptor is recommended
Power consumption:
IDLE : ≃4W
CPU Stress : ≃14W
CPU+GPU Stress : ≃22W
Power-off : ≃0.5W
Suspend : ≃0.6W
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
#odroid #SBC #ETAPRIME
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY! DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video