ODROID N2 First Look Amlogic S922X SBC - Overview And Android Test
1,102In this video, I take a look at the all-new Odroid N2 Single Board computer powered by the new Amlogic S922X hexa-core “6 For CPU”
Hardkernle has a couple OS distros available right now.
I will be testing out the first Android 9.0 build Run some benchmark, test a couple native android games and give you my initial thoughts.
Buy One Here: https://ameridroid.com/ OR https://www.hardkernel.com/
Leran More Here: https://www.hardkernel.com/
Follow Me On Twitter: https://twitter.com/theetaprime
Follow Me On Instagram: https://www.instagram.com/etaprime/
Equipment I Use:
Screen Capture Device: https://amzn.to/2STpX4C
Tool Kit: https://amzn.to/2M6l9WS
Soldering Station: https://amzn.to/2FtdVeu
Camera: https://amzn.to/2M6KFLB
Tripod: https://amzn.to/2CmdYVY
Raspberry Pi 3 B Plus: https://amzn.to/2DTF0Db
Flirc Case: https://amzn.to/2OBQTXz
Music By LAKEY INSPIRED: » SoundCloud: https://soundcloud.com/lakeyinspired
Full SpecsODroid N2 Spec:
The ODROID-N2 is a new generation single board computer that is more powerful, more stable, and faster performing than the N1. The main CPU of the N2 is based on big. Little architecture which integrates a quad-core ARM Cortex-A73 CPU cluster and a dual-core Cortex-A53 cluster with a new generation Mali-G52 GPU. Thanks to the modern 12nm silicon technology, the A73 cores runs at 1.8Ghz without thermal throttling using the stock metal-housing heatsink allowing for a robust and quiet computer. The CPU's multi-core performance is around 20% faster and the 4GB DDR4 RAM is 35% faster than the N1. The N2’s DDR4 RAM runs at 1320Mhz while the N1’s DDR3 was running at 800Mhz. The large metal housing heatsink is designed to optimize the CPU and RAM heat dissipation and minimize throttling. The CPU is placed on the bottom side of the PCB to establish improved thermal characteristics.
KEY FEATURES
* Amlogic S922X (4x Cortex-A73 @ 1.8GHz, 2x Cortex-A53 @ 1.9GHz); 12nm fab; Mali-G52 GPU with 6x 846MHz EEs
* 2GB or 4GB DDR4 (1320MHz, 2640MT/s) 32-bit RAM
* eMMC socket with optional 8GB to 128GB
* MicroSD slot with UHS-1 SDR104 support
* 8MB SPI flash with boot select switch and Petitboot app
* Gigabit Ethernet port (Realtek RTL8211F); up to 1Gbps
* HDMI 2.1 port for up to 4K@60Hz with HDR, CEC, EDID
* Composite video jack with stereo line-out and 384Khz/32bit audio DAC
* SPDIF audio via 40-pin GPIO
* 4x USB 3.0 host ports (340MB/s typical)
* Micro-USB 2.0 OTG port (no power)
* Integrated serial console interface and Fan connector
* 40-pin GPIO header (25x GPIO, 2x i2C, 2x ADC, 6x PWM, SPI, UART, SPDIF, various power signals, etc.)
* 7.5-20V DC jack; 12V/2A adapter recommended; consumption: 1.8W (idle) to 5.5W (stress)
* Recommended OS - Ubuntu 18.04 LTS with Kernel 4.9.152 LTS and Android 9 Pie BSPs
LINKS
* ameriDroid Learn - https://ameridroid.com/blogs/ameriblogs/tagged/odroid-n2
* ODROID-N2 Wiki Page - https://wiki.odroid.com/odroid-n2/odroid-n2
* ODROID Forum Page - https://forum.odroid.com/viewtopic.php?t=33781
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission at no extra cost to you!
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY! DISCLAIMER: Under section 107 of the Copyright Act 1976, allowance is made for “fair use” for purposes such as criticism, comment, news reporting, teaching, scholarship, education, and research. No Games Or Applications Are Included Or Added On Or To Any Device In This Video