PTZ Camera 4D Joystick Keyboard Controller Tutorial: Ultimate Guide
0#JoystickControllers #Camera #Joystick #Keyboard #Controller
How to connect multiple PTZ cameras to a 4D Joystick Keyboard controller?
How To Connect Multiple PTZ Cameras To Controller?
How do I hook up my PTZ Joystick to multiple cameras?
How to Use a PTZ Camera Controller?
How to Connect an IP Joystick Controller to Manage Multiple Video Conference PTZ Camera?
PTZ Camera Joystick Controller Tutorial: Ultimate Guide
PTZ Camera Controller User Manual
IP controller setup with multiple PTZ cameras
NDI PTZ Controller PTZ Camera Joystick Controller
PTZ Camera Keyboard Controller
Simple Multi-camera Control at Your Fingertips
IP PTZ Camera Controller with Joystick
Video Conference Camera PTZ Controller
PTZ Camera Keyboard Controller 4D Joystick PoE IP PTZ Controller with LCD Screen for Meeting Church Live Streaming Education RS422/RS485/RS232/RJ45, Support VISCA, PELCO-P, PELCO-D
To set up a 4D Joystick controller with multiple PTZ cameras, you can use either a daisy-chaining serial connection or a network-based IP connection, with serial being common for smaller, dedicated setups and IP offering more flexibility for larger networks. For a serial setup, connect the joystick to the first camera with a serial cable, then daisy-chain the subsequent cameras using extension cables and assign each a unique serial ID in its OSD menu. For an IP setup, connect the cameras and controller to a network switch, assign unique, sequential IP addresses to each camera, and then configure the joystick to recognize and control each device on the network.
Serial Daisy-Chain Setup (RS-232/VISCA)
This method is common for simpler setups and is often more reliable.
Power On: Turn on all your PTZ cameras and the joystick controller.
Initial Connection: Connect the joystick's serial cable to the RS-232 IN port on the first PTZ camera.
Daisy-Chain Cameras: Connect an RS-232 extension cable from the RS-232 OUT port of the first camera to the RS-232 IN port of the second camera, and repeat this for each additional camera.
Assign Serial IDs: On each camera, navigate its On-Screen Display (OSD) menu to assign a unique serial ID (e.g., camera 1, camera 2, camera 3).
Configure Controller: Configure your joystick to communicate with these unique camera IDs.
Network-Based IP Setup
This approach offers greater flexibility and is better suited for larger installations.
1. Connect to Network:
Connect your PTZ cameras and the joystick controller to a network switch using Ethernet cables.
2. Assign IP Addresses:
Assign each PTZ camera a unique, sequential IP address (e.g., 192.168.1.1, 192.168.1.2, etc.) on your network.
3. Configure Controller:
On the joystick controller, access the settings and add each camera by its IP address or through an ONVIF protocol scan.
4. Match Control:
Select the cameras on the controller's interface and assign each to a specific joystick or control channel for simultaneous operation.
Key Considerations
Controller Type:
Determine if your joystick is a serial or IP-based controller to ensure compatibility with your camera connection method.
Camera Support:
Ensure your PTZ cameras support the chosen control protocol (Serial VISCA or ONVIF for IP).
Cable Types:
Use the appropriate cables (RS-232 or Ethernet) for your setup.
Unique IDs:
Each camera needs a unique identifier (serial ID or IP address) so the controller knows which camera to command.