When a little drift started showing its ugly head on my left analog controller, I seized the opportunity to change out my OEM controllers with the GuliKit Electromagnetic replacements. No drift, smooth play, longer life? Sounded too good to be true.
We will show the drift I'm talking about, replace the controllers (with the gyro soldering) and test them.
Note: Between the calibration and play testing, I reduced my dead zones considerably. Here is where they are now: https://i.imgur.com/mWJOFqR.png
Note: As always, affiliate links are used to help fund the show. Thank you for using them.
00:00 - Chapter Jumps Available
00:07 - Intro
00:34 - Bumper
00:44 - About GuliKit
01:25 - Checking My Controller Version
01:44 - Looking over the Tutorial
01:55 - What I Ordered
02:12 - Deck Disassembly (Speed Up Edition)
03:13 - Removing the OEM Controllers
05:26 - Remove Caps / Desolder Gyro Wire
08:18 - Opening up the Gulikit Sticks
09:00 - Soldering the Gyro Wires Back On
12:04 - Installing new Controller Assemblies
16:11 - Physical Test, Overview of Calibration
16:36 - Power On, Hardware Calibration Buttons
17:20 - Software Calibration Starts
19:14 - Fixing offset calibration (long version)
23:30 - Reassembly
24:11 - Power Up
24:50 - Software Calibration (Part 2)
27:03 - Test Play (OW2) with Final Thoughts