Volcano Updated: 2015-9-30
Connecting...
Connection successful,connected state!
Version: V3.8
SN:461-844-194
Port:COM27
After format or Flash you have to press & hold power button for at least 1.30 mins.
Note for win7 users :
Start your Win 7 64bit with F8 key and choose 'Disable Driver Signature Enforcement'.
After that the spd drivers will have the ability to be loaded.
Vcc: 7
Gnd: 2 10
Detection initiated, connect the phone and power on it...
Identifying MT...
MT6226, RX: 5, TX: 6
Detection completed with 2,36 seconds!
Setting pinouts...
Pinout setting complete.
Available Ports:COM27
Waiting for phone's response,please press Power on/off button
IF Software stop here.you see Stop(red) button become Run(Green) please press and hold power button till boot downloading not start,then release power button,when you releaes power button if boot downloading stop this mean you have HARDWARE fault in your mobile
Waiting for phone's response, press and hold power on/off button...
Connecting...
Phone hardware version:8A02
CPU TYPE:MT6226
CPUID :AC818CB5
Bootloader download complete.
Flash Type: SPANSION S71PL256
Chip Capacity: 0x02000000
Flash read complete
The data has been saved in D:\VERTU\SHINEC26_06B_PCB01_GPRS_MT6226_S01.SHINEC_CU116_MULTI_LANGUAGE_V1_3.BIN, size: 32 M.