Virtual LAN Trunking Protocol cbt 05

Channel:
Subscribers:
4,170
Published on ● Video Link: https://www.youtube.com/watch?v=5lJJmQfsJms



Duration: 3:29
87 views
1


A VTP version 2-capable network device can operate in the same VTP domain as a network device
that runs VTP version 1 if VTP version 2 is disabled on the VTP version 2-capable network device
(VTP version 2 is disabled by default).
• Do not enable VTP version 2 on a network device unless all of the network devices in the same VTP
domain are version 2-capable. When you enable VTP version 2 on a network device, all of the
version 2-capable network devices in the domain enable VTP version 2.
• In a Token Ring environment, you must enable VTP version 2 for Token Ring VLAN switching to
function properly.
• When you enable or disable VTP pruning on a VTP server, VTP pruning for the entire management
domain is enabled or disabled.
• The pruning-eligibility configuration applies globally to all trunks on the switch. You cannot
configure pruning eligibility separately for each trunk.
• When you configure VLANs as pruning eligible or pruning ineligible, pruning eligibility for those
VLANs is affected on that switch only, not on all network devices in the VTP domain.
• VTP version 1 and VTP version 2 do not propagate configuration information for extended-range
VLANs (VLAN numbers 1006 to 4094). You must configure extended-range VLANs manually on
each network device.
• VTP version 3 supports extended-range VLANs (VLAN numbers 1006 to 4094). If you convert from
VTP version 3 to VTP version 2, the VLANs in the range 1006 to 4094 are removed from VTP control.
• VTP version 3 supports propagation of any database in a domain by allowing you to configure a
primary and secondary server.
• The network administrator has to manually configure VTP version 3 on the switches that need to run
VTP version 3.
A VTP version 2-capable network device
VTP domain as a network device
VTP version 2 is disabled by default)
In a Token Ring environment
VLAN switching to function properly.
VLAN numbers 1006 to 4094).
VLANs manually on each network device
VTP version 3 to VTP version 2
Simple Network Management Protocol (SNMP).
VTP version 1 and version 2 support VLANs 1 to 1000 only
VTP version 3 supports the entire VLAN range (VLANs 1 to 4094)

-~-~~-~~~-~~-~-
Please watch: "Canon EOS 3000D 18MP Digital SLR Camera with 18-55mm is II Lens, 16GB Card and Carry Case"
https://www.youtube.com/watch?v=294E8E_L9m8
-~-~~-~~~-~~-~-







Tags:
A VTP version 2-capable network device
VTP domain as a network device
VTP version 2 is disabled by default)
In a Token Ring environment
VLAN switching to function properly.
VLAN numbers 1006 to 4094).
VLANs manually on each network device
VTP version 3 to VTP version 2
Simple Network Management Protocol (SNMP).
VTP version 1 and version 2 support VLANs 1 to 1000 only
VTP version 3 supports the entire VLAN range (VLANs 1 to 4094)