WLTOYS V911 2.4 MHz Receiver Finally Sorted
738 months ago Ben Portman left a comment of my original video telling me to try setting the stick to full throttle before initialising and I honestly tried what he suggested with no success. Tonight I tried pushing the trim all the way and then the throttle all the way and it works. Moving the the trim made the difference. Oh I also had to reverse the throttle because the receiver seems to work in reverse. Next thing will be to check the range :)
If you have a question it is probably worth reading this video description first because the answer may already be here. To help you find my videos I made two search guides https://youtu.be/ceBSOoOHcgw or https://youtu.be/Zj4UgwkwYRk or checkout my playlists page https://www.youtube.com/user/GrandadIsAnOldMan/playlists?flow=grid&view=1
If you want help setting up your FS-CT6B I recommend this video by HobbyPartz https://youtu.be/WnfpbAtgXJQ and follow their link in their video description to get the CT6B config software if you don't have the disk.
I have done a follow up video here after changing the settings on my FlySky CT6B to reverse the throttle settings https://youtu.be/dwqkD29-ics
These are the eBay listings that I used. They are old and probably no use to you but they may help you to do a search. Doing your own search will allow you to find similar items with different specifications and prices.
WLTOYS V911 2.4G Receiver Board eBay listing http://www.ebay.co.uk/itm/201036946114
5 SETS SYMA X5C X5A 2.0mm 2-Pin Battery Connector Male Female with wire 26AWG http://www.ebay.co.uk/itm/141485737061
Hubsan H107 Series KH107C-002 Supper Fly Charger Battery Sets 3.7V 240mAh http://www.ebay.co.uk/itm/131268572012
4pcs of set motor Motors for Hubsan X4 H107L Clockwise QuadCopter H107-A03 7*20 http://www.ebay.co.uk/itm/251682087025
FlySky FS-T4B transmitter & Receiver http://www.ebay.co.uk/itm/190888163364
FlySky FS-CT6B transmitter & Receiver http://www.ebay.co.uk/itm/191740963226
BINDING - this worked for me !!
1 DON'T TURN ON TRANSMITTER OR RECEIVER
2 Hold bind button down on transmitter
3 Turn on transmitter while holding bind button, wait a few seconds, release the bind button.
4. Turn on the receiver - LED is flashing fast
5. Wait till the LED flash slows down - a few seconds
6. Turn off receiver
7. Turn off Transmitter
8. Turn on receiver - fast flashing and then faster flashing
9. Turn on transmitter - two scenarios
Option one - flash rate on receiver changes - move any stick on the transmitter - receiver flash changes to steady glow - Job done
Option two - after a few seconds the receiver flash changes to steady glow - Job done
ALTERNATIVE to 8 + 9
Turn transmitter on first then receiver and then same sequence occurs so it seems to work either way.
Filmed using Canon Powershot SX60 HS
Edited using Serif MoviePlus Starter Edition
Here is a selection of related playlists and videos
WLTOYS V911 2.4GHz RC Receiver playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB3NYdWYI8H-zNX_7hBM-rsU
Radio Control Remote Control playlist https://www.youtube.com/playlist?list=PLA5a2xPRSrB13Xcquw4Ff09MQzTPjeVkI
eBay impulse buy WLTOYS V911 2.4G Receiver Board https://youtu.be/NL-JYbDI_Hw
Impulse buy Receiver Board Part #2 - binding https://youtu.be/ME27Ijwt-NI
I have thousands of videos on YouTube covering a wide range of subjects. To find them follow my search guides https://youtu.be/ceBSOoOHcgw or https://youtu.be/Zj4UgwkwYRk or see my playlists page https://www.youtube.com/user/GrandadIsAnOldMan/playlists?flow=grid&view=1
Generally my projects are for my grandchildren to enjoy. OK, I enjoy them too. If anybody else likes them, that is a bonus. I like to keep my work as simple and basic as possible so that it can be copied easily and improved by anybody who wants to try themselves. I recycle or repurpose items rather than buy new and when I do buy I like to keep it cheap.
https://www.youtube.com/user/GrandadIsAnOldMan