3D Printed R2D2 - Part 39

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=tr7ntCtmMEU


Duration: 7:46
233 views
4

Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/

I've finished with the initial layer of filler for the top ring of the body. I also took a hobby knife and went over the inset body panel lines to clear them of any built up filler. I noticed I hadn't done a very good job of sanding the sides of the pieces that will be glued together, so I went over them again to make them smoother.



Other Videos By TomsProjects


2021-07-103D Printed R2D2 - Part 49
2021-06-263D Printed R2D2 - Part 47
2021-06-143D Printed R2D2 - Part 46
2021-05-293D Printed R2D2 - Part 45
2021-05-283D Printed R2D2 - Part 44
2021-05-213D Printed R2D2 - Part 43
2021-05-193D Printed R2D2 - Part 42
2021-05-183D Printed R2D2 - Part 41
2021-05-143D Printed R2D2 - Part 40
2021-05-073D Printed R2D2 - Part 39.5
2021-04-093D Printed R2D2 - Part 39
2021-03-193D Printed R2D2 - Part 38
2021-03-103D Printed R2D2 = Part 37
2021-02-263D Printed R2D2 - Part 36
2021-02-123D Printed R2D2 - Part 35
2021-02-043D Printed R2D2 - Part 34
2021-01-28Arkanoid PCB and JAMMA test rig running on arcade monitor
2021-01-283D Printed R2D2 - Part 33
2021-01-243D Printed R2D2 - Part 32
2021-01-223D Printed R2D2 - Part 32
2021-01-13JAMMA test rig update


Tags:
3D Printing
R2D2
Star Wars