JAMMA test rig update

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=bZT_NFftF9A


Duration: 21:14
85 views
3

I started making a JAMMA test rig quite a while ago but never finished it. The past couple days I added a hacked controller and an internal speaker.
This test rig can test JAMMA boards as well as arcade monitors, as it has an isolation transformer mounted inside.

The last thing I'd like to do is figure a way to incorporate a small LCD panel, which I have. I'd like to be able to choose between outputting the video signal to a real arcade CRT or the small panel. This is both a wiring challenge as well as figuring out where to put the LCD when it's being used.



Other Videos By TomsProjects


2021-04-093D Printed R2D2 - Part 39
2021-03-193D Printed R2D2 - Part 38
2021-03-103D Printed R2D2 = Part 37
2021-02-263D Printed R2D2 - Part 36
2021-02-123D Printed R2D2 - Part 35
2021-02-043D Printed R2D2 - Part 34
2021-01-28Arkanoid PCB and JAMMA test rig running on arcade monitor
2021-01-283D Printed R2D2 - Part 33
2021-01-243D Printed R2D2 - Part 32
2021-01-223D Printed R2D2 - Part 32
2021-01-13JAMMA test rig update
2021-01-063D Printed R2D2 - Part 31
2020-12-303D Printed R2D2 - Part 30
2020-12-243D Printed R2D2 - Part 29
2020-12-183D Printed R2D2 - Part 28
2020-12-103D Printed R2D2 - Part 27
2020-12-033D Printed R2D2 - Part 26
2020-11-273D Printed R2D2 - Part 25
2020-11-243D Printed R2D2 - Part 24
2020-11-183D Printed R2D2 - Part 22
2020-11-183D Printed R2D2 - Part 23