3D Printed R2D2 - Part 33

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=syMjBFVCnao


Duration: 12:30
231 views
4

Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/

This week I added some more filler to the legs, and I have also glued in the magnets. I used Gorrilla Glue 2 part epoxy to glue the magnets in place, making sure the polarity of the magnets was the same. Using matching polarity, you can swap the horseshoe covers from right to left if you wish.

Tips: wear gloves, glue in a well ventilated area and have something non magnetic that you can use to push the magnets down into the epoxy.



Other Videos By TomsProjects


2021-05-183D Printed R2D2 - Part 41
2021-05-143D Printed R2D2 - Part 40
2021-05-073D Printed R2D2 - Part 39.5
2021-04-093D Printed R2D2 - Part 39
2021-03-193D Printed R2D2 - Part 38
2021-03-103D Printed R2D2 = Part 37
2021-02-263D Printed R2D2 - Part 36
2021-02-123D Printed R2D2 - Part 35
2021-02-043D Printed R2D2 - Part 34
2021-01-28Arkanoid PCB and JAMMA test rig running on arcade monitor
2021-01-283D Printed R2D2 - Part 33
2021-01-243D Printed R2D2 - Part 32
2021-01-223D Printed R2D2 - Part 32
2021-01-13JAMMA test rig update
2021-01-063D Printed R2D2 - Part 31
2020-12-303D Printed R2D2 - Part 30
2020-12-243D Printed R2D2 - Part 29
2020-12-183D Printed R2D2 - Part 28
2020-12-103D Printed R2D2 - Part 27
2020-12-033D Printed R2D2 - Part 26
2020-11-273D Printed R2D2 - Part 25


Tags:
3D Printing
R2D2
Star Wars