Duration: 33:13

455 views

6

Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/

I've completed rings 1 and 2 of the body and have started printing ring 3, which is the final ring. I've also fixed the alignment issue I had with the skirt by reprinting the skirtb piece that somehow printed with incorrect dimensions.

I have applied some 2 part Bondo body filler to the 4 pieces that make up the bottom of ring1 to level them out. Next up will be priming, sanding, filler, primer, sanding, and on and on until the surface looks good enough to paint with the final color.