3D Printed R2D2 - Part 11

3D Printed R2D2 - Part 11

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=lvbJ26YPV_A


Duration: 28:21
344 views
5

Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/

I was able to get some prints done using PETG! I'm not sure exactly what made it start working and it's not perfect but at least I was able to print quite a few pieces. Instead of using a paper towel and dish soap, I cleaned the textured sheet with a cloth and dish soap. This enabled me to put more pressure into it and maybe clean the small depressions in the sheet.

I've also glued together a couple of the skirt and body ring1 pieces, after first giving them a skim coat of glazing putty and then sanding it back off. Next up will be giving them a coat of primer.



Other Videos By TomsProjects


2020-11-103D Printed R2D2 - Part 21
2020-11-033D Printed R2D2 - Part 20
2020-10-293D Printed R2D2 - Part 19
2020-10-233D Printed R2D2 - Part 18
2020-10-223D Printed R2D2 - Part 17
2020-10-143D Printed R2D2 - Part 16
2020-10-083D Printed R2D2 - Part 15
2020-10-023D Printed R2D2 - Part 14
2020-09-253D Printed R2D2 - Part 13
2020-09-173D Printed R2D2 - Part 12
2020-09-103D Printed R2D2 - Part 11
2020-09-033D Printed R2D2 - Part 10
2020-09-033D Printed R2D2 - Part 9
2020-08-283D Printed R2D2 - Part 8
2020-08-203D Printed R2D2 - Part 7
2020-08-143D Printed R2D2 - Part 6
2020-08-133D Printed R2D2 - Part 5
2020-08-123D Printed R2D2 - Part 4
2020-08-113D Printed R2D2 - Part 3
2020-08-113D Printed R2D2 - Part 2
2020-08-113D Printed R2D2 - Part 1


Tags:
3D Printing
R2D2
Star Wars