7DTD A20 Intelligence Base Tutorial : Destroys Max Difficulty Max Zombies : Day 777 horde defense

Channel:

Goblin Gaming

Subscribers:

4,530

Published on December 12, 2021 8:41:39 PM ● Video Link: https://www.youtube.com/watch?v=9G-tMrr5j-c

Game:

7 Days to Die (2013)

Category:

Let's Play

Duration: 16:51

39,804 views

853

Horde at max level max gs with demos and radiated: https://youtu.be/0O_ouzlQPRU (expand video description for step by step on how to build)

Base Build Guide in Text Form:
1. Start by diggin a ditch 7 wide 15 long and 3 deep. This will form the outline of most of your base.

2. Next build a bridge with a ramp in on both long sides starting at 4 blocks in.

3. Now build a 3x5 enclosure w donut hole middle on both far ends. Arrow slits on block 2&3 vertically. Place electric fences on floor for both sides in donut hole section.

4. Build the killing floor. Center block is a full cube. first 3 blocks where zombies enter across the bridge is cube 3/4 block along w the blocks on in the center row. Front row before our safety wall is full cube blocks again as shown.

5. 3x6 base floor in next section using full cube blocks. On top of that 3x2 1/2 cube blocks and leave 1 row space then 3x2 full cube blocks. 1x3 sheet blocks on top of the back row of blocks. Attach to that plate hole block over top of the electric few nces.

6. Build walls around base for the killing area. 3 high including ceiling around the killing floor leave front 2 bottom blocks of wall missing where it transitions into the player area. The front middle block of the ceiling over the electric fences should be a gable inverted steep block.

7. Build the walls aroudn the base for the player area. The walls around the player area are 4 high including the ceiling. In the ceiling of the player area the front center block is "gable inverted steep" rotated with the arrow tip pointing towards the killing floor. Then a solid block and then a "gable inverted half 1/2 offset" with the arrow pointing the same way. The next block after the gable should be a sheet. The third block from the back leave room for a door on each side 1 block down from the ceiling. Place 1 block on the grass outside of the ditch parrallel to it 1 block back from the ditch. Place a door for each side.

8. In the missing row of the inside of the player area on the center block place "Stairs 50 split. Place 1 cube blocks on each side of the stairs and 2 more bulllet proof glass block cubes on top of those. Place a door on the first block AFTER the stairs. On the walls of the bullet poof glass on one side put ladders leading up through the gable slot. When you reach the top of the ladder you have to jump to get onto the roof.

10. Place a electric wire relay in the middle back block above the generator. Another relay on 2 blocks over from the gabel above the electric fence enclosure. Place a blade trap between the gables on top of the ceiling by the player area and 2 blade traps in the zombie kill floor. Generator goes on the back wall behind bullet proof glass and door directly above the electric fences. Wire all this together but don't turn it on yet.


11. Two blocks back from the ditch and 1 over from the zombie ramp into the base (towards the player area) build a 3x3 foundation on both sides of the base. On the center block place a trip wire post on each of the foundation sets. Build walls around the foundation but leave the wall facing the base open for now. Put a ceiling on as well. In the center block of the ceiling on top put an electric wire relay. Connect that to power via the wire relay above the blade traps in the zombie kill area. Connect power to the trip wire post from the new relay. Wire the relays together. Place a blade trap with the dart in the lowest position possible facing towards the zombie base on each side. Connect the recipient trip wire to the dart trap. Then connect the two dart traps together. Build the remaining wall around the dart trap enclosure. Place a arrow slit wall on your zombie base where we left it open before w the flat side facing in to where the zombie kill box is. Place a full cube block on top of that. Dig a 3x2 ditch in front of the dart trap 3 deep to prevent zombies from tripping the trip wire before they are in the kill box inside the base.

12. Build exit ramps from the ditch for any zombies that accidentally fall in. On each corner of the base dig out the dirt under it and place a column of cube blocks down to the lowest level of your ditch just in case something falls in and takes a swing this will ensure continued stability. Place a support column under the pathway to the ramp entrance as well but do not interfere with the ditch open pathing as shown.

13. Lighting. Build relays to the left and right of the relay above your generator. Connect those to the relay above the generator. Place industrial lights in behind the bullet proof glass. wire up the lights to the relays.

14. Use plate 1/2 double 2 blocks on the first row of 1/2 blocks to create the zombie wall to stop zombies from eating your face. Put engines (3) and gas in the generator and turn it on. Viola you're done.

Other Statistics