Affordable Space Adventures--Skip Most of Origin Level 1

Channel:
Subscribers:
1,840
Published on ● Video Link: https://www.youtube.com/watch?v=OHr5s3a1JmE



Duration: 0:59
42 views
3


A trick I found in Affordable Space Adventures. A lot of the action happens on the GamePad, which isn't shown in the video, so I'll explain what I'm doing. First, fly up using the electric engine, deploy the sticky gear, and land on the right-hand wall near the edge of the artifact's bubble. Switch to the fuel engine, using level 1 mass generator and nothing else. At this point, the problem is as follows: Using mass generator level 2 or lower causes you to rise in the water. Using level 3 or higher causes you to sink, but also produces an unacceptable amount of heat within a few seconds. The solution is to repeat the following steps:

1. Set mass generator to 3.
2. Unstick.
3. Fall down for a moment.
4. Stick.
5. Set mass generator to 1. This must be done before the mass generator produces too much heat.

By repeating these steps a few times, you can work your way low enough to shoot the switch. Then simply unstick from the wall, rise to the top of the water, and fly to the end of the level with the electric engine.

I actually figured out this method of beating the level before I figured out the intended method. I thought it was strange that the level would be so tricky. Once I finally got this method to work, I realized that I could leave the level without going to the upper section, so I must have skipped something. Afterward, I went back and deduced the intended (and much easier) method.







Tags:
affordable
space
adventures
glitch
trick
skip
sequence
break
bonus
origin
story
level
levels



Other Statistics

Affordable Space Adventures Statistics For Cheeseoman

There are 42 views in 1 video for Affordable Space Adventures. His channel published less than an hour of Affordable Space Adventures content, less than 0.02% of the total video content that Cheeseoman has uploaded to YouTube.