Corrupted Primaris Conversion Guide
21Hi thank you for watching. The items needed are a modeling knife, a pin vice drill, plastic glue and liquid green stuff.
1. Carefully cut small pieces out of the edges of the models armour and remove any purity seals with the knife. Drill small holes all over the armour of the model to give it a pock marked look.
2. Be very careful and add a very small amount of the plastic glue to the drilled holes and let them dry, this will leave a more smoothed out dent to the holes you have drilled. If you add to much glue, wait about a minute for it to dry a little then use the tip of the glue bottle or knife to press into the holes and drag downwards, this will give a melted effect to the armour.
3. Apply very thin layers of Liquid green stuff to panels of the armour to leave a corrosion effect to it. Allow it to dry fully then add another thin layer to some of the areas.
4. Paint the model to your chosen chapter/legion to complete the model.
Thank you for watching. Please like, share and subscribe for more vids soon. If you would like to help support the channel the link to my patreon is at: https://www.patreon.com/user?u=6338826