Flying with the RunCam OpenIPC VRX (Using WifiLink 1 & 2 and Emax Wyvern 100mw link)

Channel:

CurryKitten

Subscribers:

26,900

Published on April 16, 2025 7:11:23 PM ● Video Link: https://www.youtube.com/watch?v=Vm2WA2TUQns

Duration: 0:00

2,579 views

151

Finally, I could go out and use the RunCam OPenIPC VRX. Previously, I was tethered to my ground station and had to record on another device. Now I can stand up, move around, and record all with one VRX.

Thanks to PCBWay for sponsoring this video. Visit them at https://www.pcbway.com/

Where you can find OpenIPC VTX's and VRX's:

RunCam (non-affiliate links)
The original WifiLink: https://shop.runcam.com/runcam-wifilink-based-on-openipc/
The WifiLink 2: https://shop.runcam.com/runcam-wifilink2-based-on-openipc/
The new VRX (preorder): https://shop.runcam.com/runcam-wifilink-rx/

Banggood (affiliate links):
Eachine Sphere Link: https://www.banggood.com/Eachine-Sphere-Link-5_8GHz-WIFI-Digital-HD-800mW-FPV-Transmitter-VTX-with-1080P-FOV-140-FPV-Camera-MAVLINK-Protocol-Based-on-OpenIPC-for-RC-Drone-p-2025007.html?ID=6329785
RunCam WifiLink2: https://www.banggood.com/RunCam-WiFiLink-5_8G-Digital-HD-Receiver-Built-in-WIFI-Dual-Antanna-Support-OpenIPC-and-Rubyy-System-for-FPV-Drone-p-2031753.html?ID=6328544
RunCam VRX: https://www.banggood.com/RunCam-WiFiLink-5_8G-Digital-HD-Receiver-Built-in-WIFI-Dual-Antanna-Support-OpenIPC-and-Rubyy-System-for-FPV-Drone-p-2031753.html?ID=6328544

Emax (affiliate Links):
The whoop sized VTX/Camera: https://emax-usa.com/collections/openipc/products/wyvern-link-alpha-openipc-100mw-video-transmitter?ref=bfrvvjfy
The larger 2 board VTX/Camera: https://emax-usa.com/collections/openipc/products/wyvern-link-alpha-openipc-800mw-video-transmitter?ref=bfrvvjfy
The 100mw Video receiver: https://emax-usa.com/collections/openipc/products/wyvern-link-alpha-openipc-100mw-video-receiver?ref=bfrvvjfy
The 2W video receiver: https://emax-usa.com/collections/openipc/products/wyvern-link-alpha-openipc-2w-video-receiver?ref=bfrvvjfy

If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ\n\nIf you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/