Using the RadioLink F722 FC to build an OpenIPC powered quad
93We've got a nice looking FC from RadioLink to test, so I decided to use it in my build on the GepRC Vapor frame. I've also got the RunCam WifiLink 2 VTX to go in, so I just need to find some motors, ESC board and a few other bits!
This was primarily a review of the RadioLink F722 Flight Controller. If you want to check it out in more detail, the product link is: https://www.aliexpress.com/item/1005007805867425.html
Other products I used were:
GepRC Vapor Frame: https://geprc.com/product/gep-vapor-d5-frame/?ref=5affD2Le
RunCam WiFiLink 2: https://shop.runcam.com/runcam-wifilink2-based-on-openipc/
RunCamWiFiLink 2 via Banggood: https://www.banggood.com/RunCam-WiFiLink-5_8G-Digital-HD-Receiver-Built-in-WIFI-Dual-Antanna-Support-OpenIPC-and-Rubyy-System-for-FPV-Drone-p-2031753.html?ID=6328544
RunCam VRX for OpenIPC: The new VRX (preorder): https://shop.runcam.com/runcam-wifilink-rx/
unCam VRX for OpenIPC via Banggood: https://www.banggood.com/RunCam-WiFiLink-5_8G-Digital-HD-Receiver-Built-in-WIFI-Dual-Antanna-Support-OpenIPC-and-Rubyy-System-for-FPV-Drone-p-2031753.html?ID=6328544
RushFPV M10 GPS: https://www.banggood.com/RUSHFPV-GNSS-Mini-M10-GPS-Module-10HZ-Rate-Built-in-Ceramic-Antenna-for-RC-Airplane-FPV-Freestyle-Drones-DIY-Parts-p-1989922.html?ID=0
RadioMaster RP1 ELRS RX: https://www.radiomasterrc.com/products/rp1-expresslrs-2-4ghz-nano-receiver?sca_ref=1584211.iYnxsMZ85K
If you liked this video and want to show your support please feel free to join my Patreon supporters here https://www.patreon.com/CurryKitten or if you decide to shop at Banggood, here's a general affiliate link which helps me out if you use it https://www.banggood.com/?p=E81211714085201408XQ\n\nIf you want to look at other ways of supporting my channel, then check out all the ways you could help out here http://www.currykitten.co.uk/support-me/