Duration: 34:24

122 views

4

เป็นขั้นตอนการเตรียมอุปกรณ์ จะบอกว่าต้องเตรียมอะไรบ้าง

3D Print Part:
https://www.thingiverse.com/thing:5202255

Part list
- Pi zero /w or Pi zero 2w
https://th.cytron.io/c-raspberry-pi/c-raspberry-pi-main-board/c-raspberry-pi-zero

- 3000mAh Lipo battery (7 x 50 x65mm)
https://www.aliexpress.com/item/4000593727117.html

- sound amp module + 270ohm + 33NF (for sound filter)
https://www.aliexpress.com/item/1547727101.html
หรือ
https://www.aliexpress.com/item/33059488515.html

- speaker
https://www.aliexpress.com/item/32759944315.html

- tactile switch
https://www.aliexpress.com/item/32847323765.html

- prototype PCB (use 4x6 and 2x8)
https://www.aliexpress.com/item/32831489775.html

- 2.0 inch TFT
https://www.aliexpress.com/item/4000830895622.html

- Copper Soldering
https://www.aliexpress.com/item/1005001375168317.html

- on-off mini slide switch
https://www.aliexpress.com/item/32721440534.html