Installing Jeep 50-Inch Straight LED Light Bar Upper Windshield Mounts by Rough Country
With durable steel construction and aggressive good looks, Rough Country's 50-inch LED Upper Windshield Light Bar Bracket is the ultimate solution for adding our premiere lighting system to your Jeep JK.
Before you begin installation review the included instructions and make sure you have all the required parts and hardware before proceeding.
You’ll also want to verify that you have all the proper tools before disassembling your vehicle.
To begin installation:
Remove the factory hardware, using a T-40 wrench.
Remove the adhesive backing from the rubber gasket, then align the holes in the gasket with the inside of the bracket. Firmly press the gasket into the inside of the light bracket.
The rubber gasket should be between the light bracket and the vehicle body.
Align the bracket and the rubber to pillar using the supplied hardware and a 6mm allen wrench then hand tighten.
Repeat steps for other side of vehicle.
Using a lock washer and 8mm bolt provided with purchase of light, install your light using the 6mm wrench provided.
Got Questions? Visit roughcountry.com or an authorized Rough Country dealer to learn more.
Get yours at http://www.roughcountry.com/jeep-jk-upper-windshield-light-bar-mounts-70504.html