Masters of the Universe Origins Eternian Royal Guard EASY-TO-DO MAKE YOUR OWN CUSTOM FIGURE!
34Download the printable Eternian Royal Guard Mask image here:
https://www.dropbox.com/s/in0yxxdca8lmfup/eternian_guard_mask_8x10.jpg?dl=0
Instructions:
1) Download the file to your computer. DO NOT PRINT THE IMAGE THROUGH YOUR WEB BROWSER.
2) Print the file through photo editing software like Photoshop. Be sure to print the image at 100% ACTUAL SIZE. The image is 8"x10" inches. This needs to be printed at actual size for the mask to fit on the figure's head correctly. I recommend printing the mask on glossy photo paper stock since it's slightly thicker and looks more professional with a glossy finish, BUT ordinary, plain paper is perfectly fine (plain paper is what's seen on the video).
3) Remove Man-at-Arms's helmet. Pry the helmet apart from the back of the head, near the hair. If it's hard to remove, carefully soften the helmet/head/glue by submerging the head for a few minutes in hot water. This should soften the glue, allowing you to remove the head from the helmet more easily. DRY both the head and helmet with a paper towel.
4) There are three different mask options: lightly detailed with vents, no detail, and more details. Select the mask of your choice. Please note that the masks are printed rightside up -- so pay close attention to the orientation of the mask before you apply it to the figure.
5) Apply double-sided tape on the INSIDE of the mask, preferably near the ends, toward the ears. This tape will help hold the mask in place on the face while you reapply the helmet to the head. When applying the mask to the face, line up each end before the notches in the head. Try to center the mask on the face.
6) Reapply the helmet. And you're DONE!
Remember, you can download the file here:
Download the printable Eternian Royal Guard Mask image here:
https://www.dropbox.com/s/in0yxxdca8lmfup/eternian_guard_mask_8x10.jpg?dl=0