Model Railway 07 Mounting the Table

Channel:
Netherlands Rudy's Hobby Channel
Subscribers:
18,400
Published on ● Video Link: https://www.youtube.com/watch?v=wJ49sNdmUPI


Duration: 5:15
1,124 views
38

After sawing the 9mm thick wooden plates in their respective shapes the table can be mounted. Along the walls the plates rest on a support beam. The peninsula and the aisle side of the wall tables rest on legs with height adjustable feet. The lower and upper tables and the peninsula are mostly done. What’s left are the two ramps. These will be sawn out of 3mm board because they need a certain flexibility, they are curved and therefore need to be twisted some to mount them flat to the surface at both sides of the curve.



Other Videos By Rudy's Hobby Channel


2022-10-29Traincontroller 10 Gold 06 Customize the Switchboard
2022-10-23Traincontroller 10 Gold 05 User Interface
2022-10-22Model Railway 11 Laying Flex Track
2022-10-14Traincontroller 10 Gold 04 Automatic Driving
2022-10-13Model Railway 10 Turnout Servo Drive
2022-10-08Traincontroller 10 Gold 03 Blocks and Sensors
2022-10-07Model Railway 09 A Paint Job & Turnout Servo Drive
2022-10-02Traincontroller 10 Gold 02 Switchboard with Turnouts
2022-09-28Model Railway 08 The Table Is Ready
2022-09-22Traincontroller 10 Gold 01 Install and Drive a Train
2022-09-12Model Railway 07 Mounting the Table
2022-09-05Instrument Landing System ILS in 4 minutes
2022-09-01Model Railway 06 - Sawing the Table
2022-08-28Model Railway 05 - TrainController
2022-08-19Model Railway 04 - Simulation in EEP
2022-08-17Model Railway 03 - Widen the Aisle
2022-08-15Model Railway 02 - Table Design in 3D
2022-08-12Model Railway 01 Layout Design
2022-08-04DME (Distance Measurement Equipment) in 3 minutes
2022-07-27EEP Lua Automatic Train Control v2.3.2 - 11
2022-07-11VOR Navigation in 6 Minutes - Intercept a Radial