Ms. Pac-Man PCB Edge Repair Using a New Fingerboard

Channel:
United States That Tim Guy
Subscribers:
2,670
Published on ● Video Link: https://www.youtube.com/watch?v=4qbN1uw1hlA


Duration: 15:52
5,854 views
48

Part of the existing edge connector on this Ms. Pac-man arcade PCB is burnt and toasty. It has been previously repaired and may be the source of an AC hum. Here I go through how I repaired the edge with a new fingerboard that is soldered in place. Suggestions are always welcome!



Other Videos By That Tim Guy


2015-02-17Basement Update 3
2015-02-17Atari Pole Position - Status Update #1
2015-02-09New SEGA GAME GEAR Unboxing
2015-01-08DK Status Update #4
2015-01-08Basement Update 2
2014-12-16Basement Update
2014-11-13Pinball (EM) Bell Tones/Chimes Ringing in Action!
2014-11-11Sega Genesis Cartridge Battery Holder Mod
2014-11-11Ms. Pac-Man - Bezel Repair
2014-11-11Ms. Pac-Man - Status Update #4
2014-10-13Ms. Pac-Man PCB Edge Repair Using a New Fingerboard
2014-10-12Ms. Pac-Man - Status Update #3 - I HAVE RED!
2014-09-21Ms. Pac-Man - Status Update #2
2014-09-09Ms. Pac-Man - Status Update #1
2014-09-05Final Lap Arcade - Status #1
2014-09-02Donkey Kong Cocktail - Status Update #3
2014-08-23Donkey Kong Cocktail - Status Update #2
2014-08-23Donkey Kong Cocktail - Status Update #1
2014-08-23P.S.A. #1 - Don't forget the insulator with the HOT (Sanyo EZ 20)
2014-08-22Sanyo 20 EZ Flyback & HOT Repair - Part 3
2014-08-22Sanyo EZ 20 Cap Kit Locations - Part 2


Tags:
Ms. Pac-Man (Video Game)
edge connector
pcb
repair
arcade
arcade repair
Printed Circuit Board
fingerboard