NIM-4FXO Cisco Replacement Without Configuration || NIM 4FXO Into The ISR 4000 Series Router
2#ciscovoip #ciscorouter #nim-4fxo
To replace a Cisco NIM-4FXO without configuration you must manually insert the module into the ISR 4000 Series router and its online insertion and removal support means you don't need to power off the device.
However, you will still need to configure the device via the Cisco IOS XE command-line interface for the module to register make calls and function correctly with your analog lines.
Steps 1.for Replacing the Module
Physically Insert the Module: Gently insert the new NIM-4FXO into a free NIM slot on the Cisco ISR 4000 Series router.
Step 2.Power the Router (if needed): The NIM-4FXO supports OIR, so you do not need to power down the router to install the module.
Step 3.Verify Detection: The router should automatically detect the new module.