RC4ever's F-22 Setup and Programming EXPLAINED ✈️ FrSky Taranis X9D+
33This F-22 setup video goes over programming with FrSky Taranis X9D+ radios. I explain everything for you! You asked for it and I have listened! :)
I also cover a few other topics in the video but I mostly focus on explaining what is it that my F-22 does and how I programmed my transmitter settings to achieve it. Although this is for an OpenTx architecture, you probably can take ideas for other radio ecosystems.
I know it's taken me a while to bring this video up online, but better late than never I guess! :p
Also, I know the vid turned out a bit long-ish, but making it shorter would have probably required more work than I was willing to put in ATM, so it is what it is. You can use the CHAPTERS to navigate to the parts that interest you and ignore the rest! ;)
If you have further doubts or want to know more about this jet, I encourage you to ask questions in the comments section here or otherwise head over to the forums (threads linked below) and I will be happy to attend you there ;)
RCGroups: https://www.rcgroups.com/forums/showthread.php?3155844-Freewing-90mm-F-22-Raptor/
Hobbysquawk: https://www.hobbysquawk.com/forum/rc-airplanes/rc-jets/159954-freewing-90mm-f-22-raptor-official-thread
QUICK RATES/EXPO OVERVIEW TABLE
(low-mid-high)
RATES*
ROLL 50/90/100
PITCH 60/100/100
YAW 75/85/100
EXPOS
ROLL 65/75/80
PITCH 50/80/70
YAW 00/30/30
*These rates assume maximum servo travels achievable with stock servos, after leveling out some throw asymmetries.
TL:DR - I fly almost exclusively on high rates, so that's 100-100-100 full mechanical throws on all axis and 80-70-30% expo (Roll-Pitch-Yaw).
#rc #aviation #rcplane #opentx #frsky #f22
rc plane, rc planes, airplanes, airplane, aircraft, model airplane, flying model, jet, jets, turbine, rc turbine, su-35, mig-29, f-22, eurofighter, mig-29, f-18, gripen, rafale, aerobatics, cobra maneuver, tutorial, two bros rc, artur rc, fighter jet, rc jet, rc fighter plane, fighter plane, rc, edf, motion rc, fms, fms hobby, fms model, horizon hobby, e-flite
LIST OF CONTENTS:
0:00 - HELLO WORLD! :)
0:47 - Aircraft overview
1:15 - Gold tinted canopy effect
2:27 - HUD LED
3:25 - Rx Antenna placement
3:49 - OCD Friendly wire management
4:35 - Rx battery (2S)
5:00 - Main battery packs (8S)
5:45 - Battery installation inside the plane
7:48 - Tx/Plane powering up procedure and good practices
10:28 - Overview of aircraft controls and mixes
20:18 - TX menu: Model Setup
21:51 - TX menu: Flight Modes
22:55 - TX menu: Inputs (Rates / Expo)
25:40 - TX menu: Mixes
44:00 - TX menu: Outputs (Subtrim / Endpoints)
46:44 - TX menu: Custom Curves
49:10 - TX menu: Logical Switches / Spec. Funcs.
50:04 - TX: Channels Monitor
57:30 - Closing remarks
58:18 - Boo!
The rc plane on the video is dear 'Scarlett', my ̶s̶o̶ ̶f̶a̶r̶,̶ ̶f̶i̶r̶s̶t̶ ̶a̶n̶d̶ ̶o̶n̶l̶y̶ Freewing F-22 Raptor airframe :)
To watch flight videos of this jet, you can check the rest of the videos on my channel!
www.youtube.com/RC4ever
And please, subscribe and hit the bell button so you don't miss future uploads!! :)
SPECS (Reflecting my setup):
Freewing F-22 Raptor Ultra Performance 8S 90mm EDF Jet - PNP
12-Blade EDF power system (installed)
4075-1390Kv inrunner brushless motor (installed)
150A ESC with EC5 connector (installed)
Electronic retractable landing gear (installed)
Servos, LED Lights (installed)
Model Scale: 1/13th
Wingspan: 1060mm
Length: 1500mm
Empty Weight: Around 3100g (w/o battery)
TOW: Around 3900g
CG: +160mm from the leading edge of the wing at the root
Material: EPO
Motor: Stock 8S 4075-1390Kv Inrunner
ESC: Stock Freewing (Hobbywing) 150A, HV
EDF: Stock Freewing 90mm 12-Blade
Servos: (All stock)
- 2x 9g Digital hybrid gear
- 2x 17g Digital metal gear
- 6x 23g Digital metal gear
Landing Gear: Electronic retractable with all metal shock absorbing struts
Receiver: FrSky X8R, using 12 channels so far (user choice)
Gyro: Hobby Eagle A3S3 (added as a mod)
Separate UBEC: TGY 8-15A (added as a mod)
Receiver battery: Rhino 2S 500 and 610mAh (added as a mod)
Main battery packs: (All weighing around 800g combined)
- HRB 2x 4S 4200mAh 50C
- Turnigy Nanotech 2x 4S 3300mAh 70C
Mind that although most of the jet is stock, I performed several modifications. Removed the infamous Blue Box and wing ribbon wires, passed individual leads to wing servos, mixed them all separately, removed pilot figure and nose gear light, installed a HE A3S3 gyro (which required physical servo reversing one stabilator servo, inverting motor and pot wires), added a green LED to make a fake HUD reflection effect, airbrushed the canopy to make it look more golden, like the full-scale one. Need to pick the sun at the right angle to show up though!
-------------------------------------------
You can also follow me on:
YouTube: https://www.youtube.com/Airguardian
Facebook: https://www.facebook.com/RC4ever
Instagram: https://www.instagram.com/Airguardian
Twitter: https://www.twitter.com/RC4Media