Timelapse 3D Print Six 2.5 inch HDD SSD mounting caddy Part 1

Timelapse 3D Print Six 2.5 inch HDD SSD mounting caddy Part 1

Channel:
United States Wade Hamel
Subscribers:
3,790
Published on ● Video Link: https://www.youtube.com/watch?v=-Hq0gS8FBNA


Duration: 6:16
275 views
1

The actual purpose of this print will become more apparent in time however the project is not quite ready as of yet. The print is done though so I thought I would share that.

Creality 3D CR-10 Mini: https://www.gearbest.com/3d-printers-3d-printer-kits/pp_778273.html?lkid=13579757

Thingiverse link: https://www.thingiverse.com/thing:1715878

Printer: Creality CR-10 Mini
Slicer settings:
Print Material: PLA
Layer Height: .1mm (Fine)
Wall Thickness: 1.2mm
Top/Bottom Thickness: 1.2mm
Infill Density: 40%
Hot end temp: 200 Degrees Celcius
Bed temp: 57 Degrees Celcius
Initial Layer Bed Temp: 60 Degrees Celcius
Supports: No
Print speed: 60mm/s
Infill Speed: 70mm/s
Travel Speed: 100mm/s
Initial Layer Speed: 30mm/s
Plate Adhesion Type: Skirt
Skirt line width: .4 mm



Other Videos By Wade Hamel


2018-04-28Let's Play: 8-Bit Invaders! #7 - Cliff Jumping (Marines)
2018-04-28Timelapse 3D Print Peon230 Drone Arm Support v1
2018-04-27Timelapse 3D Print Peon230 Drone Base v1 1
2018-04-27Music: The Way to Vegas (Electronica/Noise/Experimental/Ambient)
2018-04-26Let's Play: Frostpunk #2
2018-04-26Let's Play: PC Building Simulator #21
2018-04-26Let's Play: 8-Bit Invaders! #6 - Betrayal (Marines)
2018-04-26Timelapse 3D Print Six 2.5 inch HDD SSD mounting caddy Part 2
2018-04-25Let's Play: PC Building Simulator #20
2018-04-25Let's Play: 8-Bit Invaders! #5 - Saucer Shoot (Marines)
2018-04-25Timelapse 3D Print Six 2.5 inch HDD SSD mounting caddy Part 1
2018-04-25Let's Play: Frostpunk #1
2018-04-24Let's Play: PC Building Simulator #19
2018-04-24Contest winners for 4-21-2018
2018-04-24Contest video 4-24 through 4-28-2018
2018-04-24Let's Play: 8-Bit Invaders! #4 - Alien Swarm (Marines)
2018-04-23Let's Play: PC Building Simulator #18
2018-04-23Let's Play: 8-Bit Invaders! #3 - Triple Threat (Marines)
2018-04-22Let's Play: 8-Bit Invaders! #2 - Resource Denial (Marines)
2018-04-22Let's Play: PC Building Simulator #17
2018-04-21Let's Play: 8-Bit Invaders! #1 - Tutorial and Bug Hunt (Marines)


Tags:
3D printer
3D
3D printing
Time lapse
timelapse
3d printed
extended
filament
pla
plastic
thingiverse
youmagine
yeggi
anet
e10
anet e10
anet e-10
e-10
CR-10
Creality
CR-10 Mini
Creality CR-10