Undo DISKPART Clean command
0Here's how to undo DISKPART Clean command.
i. Here are some free utilities that you can use to recover partitions after a DiskPart clean operation:
* **EaseUS Data Recovery Wizard**
* **Puran File Recovery**
* **Recuva**
* **Disk Drill**
* **MiniTool Power Data Recovery**
These utilities can scan your hard drive for deleted or lost partitions and then recover the data from those partitions. It is important to note that the sooner you try to recover your data after a DiskPart clean operation, the better the chances of success.
Here are the steps on how to use EaseUS Data Recovery Wizard to recover partitions after a DiskPart clean operation:
1. Download and install EaseUS Data Recovery Wizard on your computer.
2. Launch the program and select the drive that you want to recover data from.
3. Click on the "Scan" button to start scanning the drive.
4. Once the scan is complete, you will see a list of all the files that were found on the drive.
5. Select the files that you want to recover and click on the "Recover" button.
The recovered files will be saved to a location that you specify.
It is important to note that these utilities are not perfect and may not be able to recover all of your data. If you are unable to recover your data using these utilities, you may need to contact a data recovery service.
ii. There are a few ways to recover data lost by DiskPart clean using CMD. One way is to use a data recovery tool. There are many data recovery tools available, both free and paid. Some popular data recovery tools include:
* EaseUS Data Recovery Wizard
* Recuva
* Disk Drill
* Stellar Data Recovery
Once you have chosen a data recovery tool, follow the instructions to scan your hard drive for lost data. Once the scan is complete, you can select the files you want to recover and save them to a new location.
Another way to recover data lost by DiskPart clean is to use the CHKDSK command. CHKDSK is a built-in Windows command that can be used to check and repair disk errors. To use CHKDSK to recover data, follow these steps:
1. Open a command prompt window as administrator.
2. Type the following command and press Enter:
```
chkdsk drive letter: /f
```
Replace drive letter with the letter of the drive that contains the lost data.
3. CHKDSK will scan the drive and attempt to repair any errors. Once the scan is complete, you may be able to access the lost data.
It is important to note that both data recovery tools and CHKDSK may not be able to recover all of the data that was lost by DiskPart clean. If you are unable to recover your data using these methods, you may need to contact a data recovery service.
Here are some tips for recovering data lost by DiskPart clean:
* Do not write any new data to the drive that contains the lost data. This could overwrite the lost data and make it impossible to recover.
* Start the recovery process as soon as possible after the data is lost. The sooner you start, the better the chances of success.
* Use a reputable data recovery tool. There are many low-quality data recovery tools available that may not be able to recover your data.
* Back up your data regularly. This will help to protect your data in case of a disaster.
iii. The DiskPart recover command is used to recover a damaged or lost partition. A partition is a logical division of a hard drive that can be used to store data. When a partition is damaged or lost, the data on that partition may be inaccessible. The DiskPart recover command can be used to scan the hard drive for damaged or lost partitions and attempt to recover them.
The syntax for the DiskPart recover command is as follows:
```
recover drive letter:
```
Replace drive letter with the letter of the drive that contains the damaged or lost partition.
For example, to recover a damaged or lost partition on drive C, you would use the following command:
```
recover C:
```
The DiskPart recover command may take several minutes to complete. Once the command is finished, you should be able to access the data on the recovered partition.
It is important to note that the DiskPart recover command may not be able to recover all of the data on a damaged or lost partition. If the data on the partition has been overwritten, it may be impossible to recover.
Here are some tips for using the DiskPart recover command:
* Do not write any new data to the drive that contains the damaged or lost partition. This could overwrite the data and make it impossible to recover.
* Start the recovery process as soon as possible after the partition is damaged or lost. The sooner you start, the better the chances of success.
* Use a reputable data recovery tool. There are many low-quality data recovery tools available that may not be able to recover your data.
* Back up your data regularly. This will help to protect your data in case of a disaster.