Virtual Boy Tripod Mount Assembly Guide
6There are 4 parts to your Tripod mound:
- The Adapter (has the 2 prongs on it and the rubber band in it)
- A Clamp (has the letter 'A' embossed on the top)
- B Clamp (has the letter 'B' embossed on the top)
- TriPod Adapter (has the screw in it)
To assemble the adapter you'll need to take one of the screw included and screw in the A Clamp to the A side of the Adapter until you can hear no rattling(The A on the adapter is embossed like the Clamp but on the side it'll go in). A Clamp will only fit on the A side of the adapter
Then take off the wing nut place the B Clamp on the B side, and tighten the B-Clamp down with the threaded screw.
Your Virtual Boy Adapter is complete now we need to attach the TriPod Adapter.
With the small hole facing the A Clamp and visible, take the remaining 2 screws and screw in the TriPod Adapter to the Virtual Boy Adapter.
And that completes assembly.
To attach it to the Virtual Boy loosen the wing nut on the B Clamp so the virtual Boy can hook onto the A Clamp, and once in tighten Wing Nut until firm. If you want to release it, simply loosen the Wing Nut. #16bitreview
----------External Links----------
Web Site - http://16bitvirtualstudios.com/
16 Bit Store - http://www.16bitstore.com
16 Bit Games - http://16bitvirtualstudios.com/Games
Facebook - https://www.facebook.com/16bitvirtual/
Twitter - https://twitter.com/16bitvirtual
Instagram - https://www.instagram.com/16bitvirtual/