Waterproofing my DIY 3D printed enclosures (new way)

Channel:
United Kingdom Geb Systems
Subscribers:
567
Published on ● Video Link: https://www.youtube.com/watch?v=FzIHx0UjgIM


Duration: 3:33
64 views
1

I will now provide a brief overview of the waterproofing and dust-proofing measures implemented in my enclosure, which necessitates the insertion of an Ethernet cable

I would like to note that while the measures I am taking are not a guaranteed 100% solution with an IP rating, they do appear to be sufficient for a home automation setup



Other Videos By Geb Systems


2024-05-08DIN Rail and Terminal Block Enclosure | Arduino Modbus Project
2024-05-06Enclosure seal blunder update | Arduino Modbus Project
2024-05-03Enclosure seal blunder | Arduino Modbus Project
2024-04-30The cheapest barcode scanner | DIY Warehousing | GebWMS
2024-04-28Power and data enclosure for all nodes | Arduino Modbus Project
2024-04-28Wire management inside enclosures | Arduino Modbus Project
2024-04-21Rig Update: 2xSHT20 | Arduino Modbus Project
2024-04-18DIY barcode scanner on a budget for the warehouse | GebWMS
2024-04-06Using TPU as Oring | Arduino Modbus Project
2024-04-02Rig Update | Arduino Modbus Project
2024-03-24Waterproofing my DIY 3D printed enclosures (new way)
2024-03-20Modular DIY Blocks for a DIN rail rig
2024-03-16Arduino Modbus Experiments: Power Module Complete
2024-03-03RJ45 Splitter Enclosure Ingress Test | Arduino Modbus Project
2024-02-28RJ45 Splitter Enclosure | Arduino Modbus Project
2024-02-22Design a holder for nearly anything with TinkerCAD
2024-02-20Waterproofing the Power Enclosure | Arduino Modbus Project
2024-02-18Modbus Power Module Enclosure V1
2024-02-08DS1307 RTC
2024-02-03Man Cave 2B
2024-01-25DIY prop assembly | Arduino Modbus Project