Amiga 1000 - Part 4
Channel:
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=xMBfzG5JzIs
10Testing the audio and the Gotek virtual floppy drive.
It looks like I'll need to figure out how to make the Gotek drive load Kickstart, as it isn't just automatically loading it when it's selected on the Gotek.
The 'DANGER' screen when trying to boot the Amiga Test Kit disk shows 'TWINKICK FINAL'. The physical Kickstart disk I've been using is a TwinKick disk that first loads Kickstart 1.3 and if you leave the disk in it will then load Kickstart 3.1. I'll make a Kickstart 1.3 disk and that should get rid of that message, although it is pretty cool that the Test Kit does that.
Other Videos By TomsProjects
| 2025-06-04 | 3D Printed R2D2 - Part 114 |
| 2025-04-11 | 3D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 18 |
| 2025-04-11 | 3D Printer Voron 2.4 Rev. C 350mm - Build Progress Part 17 |
| 2025-03-19 | Amiga 1000 - Part 8 |
| 2025-02-26 | Amiga 1000 - Part 7 |
| 2025-02-17 | Amiga 1000 - Part 6 |
| 2025-02-17 | Amiga 1000 - Part 5 |
| 2025-02-09 | Amiga 1000 - Part 2 |
| 2025-02-09 | Amiga 1000 - Part 4 |
| 2025-02-09 | Amiga 1000 - Part 3 |
| 2025-02-09 | Amiga 1000 - Part 1 |
| 2024-11-12 | Pacific Northwest R2 Builders Club: 2024 R2 Northwest Builders Expo - Aftermath. |
| 2024-11-12 | Pacific Northwest R2 Builders Club: 2024 R2 Northwest Builders Expo - Showtime! |
| 2024-11-12 | Pacific Northwest R2 Builders Club: 2024 R2 Northwest Builders Expo - Prep and setup. |
| 2024-11-05 | 3D Printed R2D2 - Part 112 |
| 2024-11-05 | 3D Printed R2D2 - Part 113 |
| 2024-10-31 | 3D Printed R2D2 - Part 111 |
| 2024-09-11 | 3D Printed R2D2 - Part 110 |
| 2024-09-11 | 3D Printed R2D2 - Part 109 |
| 2024-09-02 | 3D Printed R2D2 - Part 108 |
| 2024-09-02 | 3D Printed R2D2 - Part 107 |