DIY How to Install LED Strip on Monitor Backlight | 3 Easy Steps and Cheap
3#DIY #LED #HowTo
Easy DIY on how to install LED Strips on your computer monitor/tv:
Step 1 01:42
Step 2 01:48
Step 3 05:34
Materials Needed:
1. LED Strip
2. Switch or Remote (comes with the LED)
3. An old 5v charger or a 5v power source (commonly bundled with the LED strip but if you have an old one laying around, you can use it)
Tools:
1. Masking Tape
2. Electrical Tape or Heat Shrinks
3. Heat Gun ( only if you are using heat shrinks)
4. Wire Cutters or Scissors
5. Soldering Iron and lead
Additional Information: Instead of rigging it up with a remote, this can be rigged on your PC itself for it to synchronize with your RGB light since the ones that I am using here are ARGB ones. That is how I set it up when im using these strips inside my PC but you have to think about the wire routes if you are going to plug this directly into the LED 5v of your motherboard.
Another one is If you have the option, go for the 144 LED ones as they look way better than the ones with less LED's.
Don't forget to subscribe if you want to see more of this type of video!