DT990 Pro with 3D Audio (PS5 Tempest Audio Engine ) check description for updated settings!

Channel:

EverythingOLED

Subscribers:

6,800

Published on May 5, 2023 12:35:18 PM ● Video Link: https://www.youtube.com/watch?v=nv_k5FolJuU

Duration: 3:23

6,117 views

82

• How to amplify the ”3D Audio Engine”?

Connect your DT990 Pro’s to you PS5 via a DAC that supports 7.1 Virtual Surround Sound.

Make sure the DAC has its max sample rate set to the highest it can allow.

In 3D AUDIO settings set it to the highest option being “Type 1”

Make sure your setting the audio on the PS5 to DTS, it is for surround channel audio sources which is were the PS5 3D Audio works under.

Max Out the PreAmp to +9db if possible and run a flat EQ.

Enjoy!


Want to learn about audio quality?

Example: ”24bit 96.000khz” or ”16bit 44.100khz”

• 16bit Standard
• 24bit High Quality
• 32bit Studio Quality

I have mine set to 24bit 96.000khz with Stereo Channel and “Type 1” and DTS used to boost the situational awareness in the audio banding.

”For best audio quality you must choose to turn off all effects and only run your headphones through a stereo channel. EQ is acceptable but only when using 24bit or above and using a high sample rate with it for low delay in audio frequencies”

EQ does ruin the audio image that Beyerdynamics had in mind when they created DT990pro, so I would recommend not using an EQ.

The higher the Bitrate = Higher Quality

The higher the kHz/Hz = Faster Transfer Speed of tge information/data of the incoming audio, which adds more spacing in the sound Image, making it sound more 3D.

———————————————————————
OBS!
do not plug in your headphones or headset to your Dualsense controllers 3.5mm headphone jack. It will downsample the audio quality to play at 16bit 44.100khz. PS5’s normal is 24bit 48.000khz.

The DAC will allow you to play at a higher source quality then the PS5’s native.
———————————————————————

• Gaming Headset:
means headphones with lots of distortion to create a poor mans virtual surround sound and it has a microphone plugged into it that steals some of the headsets powerdrawal. Sound image is small and is not recommended for true audio listening.

• Gaming Headphones:
means almost no manipulation from the creators, a sound profile from the creators have been put in to place to make there headphones sound unique to there own brand.

Headphones with a 5-10hz to 28-35.000hz are considered High End, creating very realistic sounding audio and insanely good separation.

These headphones can get better audio out of there cans with use of a DAC.


• Studio Headphones:
zero audio tampering and limitless potential in boosting and limiting audio, this is what sound designers used when making sound effects ingame and what music artists use.