Example of large bridges on the Rostock MAX

Channel:
United States f15sim
Subscribers:
2,670
Published on ● Video Link: https://www.youtube.com/watch?v=hQ1X-N6yio4


Duration: 6:15
11,013 views
34

The narrow bridge is 1" wide and the large bridge is 3" wide.
The material is Ultimachine Translucent Red PLA @ 1.75mm. Printed @ 192C with a 55C bed temperature.



Other Videos By f15sim


2014-10-24Rostock MAX v2 Assembly: Checkpoint #6
2014-10-24Rostock MAX v2 Assembly: Checkpoint #5
2014-10-24Rostock MAX v2 Assembly: Checkpoint #4
2014-10-24Rostock MAX v2 Assembly: Checkpoint #3
2014-10-24Rostock MAX v2 Assembly: Checkpoint #2
2014-10-24Rostock MAX v2 Assembly: Checkpoint #1
2014-05-28Time lapse print of a 2" tall Gnome.
2014-05-14Fuel Flow gauge demo...
2014-04-16Flight simulator vibration feedback system demo using SHKR-1 control board.
2014-03-03Adjusting the new Rostock MAX v2 Cheapskate carriages.
2014-02-07Example of large bridges on the Rostock MAX
2013-11-04Installing the Auto-Level mod on the LulzBot TAZ
2013-10-18SeeMeCNC Orion Unboxing
2013-10-13Huge Rook model printed on a stock Rostock MAX 3D printer.
2013-09-27Video to illustrate the use of the wire guide clips and wire routing.
2013-09-23First look at the new delta arms for the Rostock MAX printer from SeeMeCNC
2013-09-21Rostock MAX Upgrade: Hot End
2013-09-14Short video showing the engraving process I use for panels (LOUD! MUTE AUDIO!)
2013-07-28Example of proper Cheapskate bearing adjustment
2013-07-07Quick overview of the SeeMeCNC top mounted extruder drive.
2013-05-27Lulzbot TAZ Unboxing & Setup, Part Two.


Tags:
3d printer bridge rostock