Short video showing the engraving process I use for panels (LOUD! MUTE AUDIO!)

Channel:
United States f15sim
Subscribers:
2,670
Published on ● Video Link: https://www.youtube.com/watch?v=Trc_TrSvEH8


Duration: 0:34
285 views
2

This is the navigation panel for the F-15 undergoing engraving in the laser. It's a multi-pass process that cuts through the paint mask and the layers of paint underneath.

The panel is designed for edge lighting.



Other Videos By f15sim


2014-05-14Fuel Flow gauge demo...
2014-04-16Flight simulator vibration feedback system demo using SHKR-1 control board.
2014-03-03Adjusting the new Rostock MAX v2 Cheapskate carriages.
2014-02-07Example of large bridges on the Rostock MAX
2013-11-04Installing the Auto-Level mod on the LulzBot TAZ
2013-10-18SeeMeCNC Orion Unboxing
2013-10-13Huge Rook model printed on a stock Rostock MAX 3D printer.
2013-09-27Video to illustrate the use of the wire guide clips and wire routing.
2013-09-23First look at the new delta arms for the Rostock MAX printer from SeeMeCNC
2013-09-21Rostock MAX Upgrade: Hot End
2013-09-14Short video showing the engraving process I use for panels (LOUD! MUTE AUDIO!)
2013-07-28Example of proper Cheapskate bearing adjustment
2013-07-07Quick overview of the SeeMeCNC top mounted extruder drive.
2013-05-27Lulzbot TAZ Unboxing & Setup, Part Two.
2013-05-20Lulzbot TAZ unboxing and setup, Part One
2013-05-17Assembling the RamboLCD wiring adapter board.
2013-03-13Rostock MAX printing 20 "plated" parts
2012-12-27High speed test on the Rostock MAX.
2012-12-24Printing a hall effect sensor mount.
2012-12-20Rostock MAX printing a "Stretchlet" at 300% normal feed speed.
2012-12-16Rostock MAX 3D printer introduction.


Tags:
flight simulator laser engraving panel edge lit