First you get the PCB panel, then you get the tester, then you get the Matrix 🔌🧠🔬

Channel:

Adafruit Industries

Subscribers:

460,000

Published on July 13, 2023 1:35:37 PM ● Video Link: https://www.youtube.com/watch?v=63homMn_21U

Duration: 1:15

3,054 views

45

We are gettin' really really close to putting the new Matrix Portal S3 https://www.adafruit.com/product/5778 into the shop, here's a tester we use to burn in the self-test code. The RP2040 brains https://github.com/adafruit/RP2040-Based-Tester-Brains-PCB resets the S3 into the ROM bootloader, the sends over compressed binaries via USB. when the self-test starts up it notices that it's in the test jig and performs a self test of the GPIO and voltages. once done, it turns into a demo board that has a basic matrix display output for users to verify functionality. This way we only have to program the board once!

#adafruit #electronics #Espressif

Visit the Adafruit shop online - http://www.adafruit.com

-----------------------------------------
LIVE CHAT IS HERE! http://adafru.it/discord

Adafruit on Instagram: https://www.instagram.com/adafruit

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
-----------------------------------------