GoTek Floppy Emulator Mod: OLED Display with 3D printed bracket

Channel:

root42

Subscribers:

7,950

Published on November 23, 2018 11:13:29 PM ● Video Link: https://www.youtube.com/watch?v=pX5blrJYb5w

Duration: 10:56

8,143 views

121

In this episode I replace the GoTek's three digit LED display with an 0.91" OLED display. The mod is straightforward, and does not requite any tweaking of the FlashFloppy firmware. Just a correct wiring up of the I2C display. Plus you get a three digit LED I2C display for use in future projects for free!
I use a 3D printed bracket to keep the OLED display in place.

Support me on Patreon: https://www.patreon.com/root42
Support me on Ko-Fi: https://ko-fi.com/root42
Support me on PayPal: https://paypal.me/ArneSchmitz

0.91" OLED display: https://www.makershop.de/display/oled/mini-oled-2/
Bracket: https://www.thingiverse.com/thing:3042794
FlashFloppy Firmware: https://github.com/keirf/FlashFloppy/wiki