How to LED Tail light Strip Installation BMW
14How to LED Tail light Strip Installation
RGB Colorful Car Flow Type LED Strip Tailgate Turn Signal Lights Bar Trunk Strips Lamp 12V Light Projector Car Accessories
First you need to find +12v after the switch, the upper fuses were after the switch and the lower ones before the switch in my case.
I put a fuse, to one side I soldered a cable for the plus, And I ran the cable to the back of the trunk.
The red cable is the Plus and the black is the minus.
We took the plus from the fuse panel, the minus we will attach a cable to the metal part in the car's cabin.
There are two yellow cameras, one for the right turn signal and the other for the left turn signal, I connected them to the turn signals of the rear lights.
And for the stop I took the plus from the third stop from above the ceiling.
For reverse gear, I took the plus from the trunk, which was more complicated, I had to find this cable,
I did not connect the green and pink cables at all, only one can be connected to the constant plus, but I did not want it to be constantly on and I did not connect them.
And finally I connected an on/off switch.
And the final result