Category:

Tutorial

Duration: 2:11

3,500 views

18

How Do You Operate a Manual Drum Auger?
Operating a manual drum auger is a straightforward process if you follow these steps:
Preparation:
Put on gloves to protect your hands.
Place a bucket under the drain to catch any debris.
Insert the Auger:
Loosen the setscrew on the drum to release the cable.
Insert the end of the auger cable into the drain or pipe[6].
Feed the Cable
Push the cable into the drain while turning the handle of the drum clockwise.
Continue feeding the cable until you feel resistance, indicating you’ve reached the clog[5].
Break Up the Clog:
Lock the drum to prevent the cable from retracting.
Rotate the drum handle back and forth while pushing and pulling the cable to break up the clog.
Clear the Clog:
Once you feel the clog has been cleared, unlock the drum.
Carefully retract the cable by turning the drum handle counterclockwise.
Clean Up:
Remove any debris caught on the auger tip.
Run water through the drain to ensure it is completely clear.
Following these steps should help you effectively use a manual drum auger to clear clogs in your drains. #toiletcleaning
Disclaimer: As an Amazon Associate I earn from qualified purchases.
#ad