Huge Performance boost! PICO 4 PCVR with USB-C Tethered "NEW DRIVER"

Channel:

JugandoRD

Subscribers:

2,100

Published on December 5, 2022 12:47:26 AM ● Video Link: https://www.youtube.com/watch?v=9J6S-0eqnN4

Game:

Microsoft Flight Simulator (2020)

Duration: 10:20

9,943 views

0

Don't forget to hit that link and sub if you found this useful, it is always good to give back!

UPDATE: Watch this video on how to setup usb tethered on pico 4, plus some troubleshooting tips. https://youtu.be/XxxweFVNyR0


1- This is the link where I found out about the tethered driver "USB RNDIS6 Adapter":


https://forum.xda-developers.com/t/fix-usb-tethering-lags-freezes-on-windows-8-1.3039183/




2- Follow the steps on this website BUT! look and select the driver name "USB RNDIS6 Adapter" instead of the one this website tells you to set because that one too causes bluescreens on windows 10:


https://appuals.com/bsod-caused-by-usb-tethering-windows-11/


3- If you want to try the USB-C to Ethernet Adapter with charging port use this link listed below:


https://www.amazon.com/gp/product/B09MTN8ZT3/ref=ox_sc_act_title_4?smid=A2WQDEC6M6VXPW&th=1




How to enable USB Tethering:


- You can get USB Tethering Enabled on the Pico 4 and use Virtual Desktop wired! This really helped shave a few ms off of latency and really helped reliability.
- The trick is to get your Pico 4 into USB debugging mode (tapping the software version a few times, then going to Developer in the Pico 4).
- Then, connect a USB 3.0 cable and run this adb command via your connected PC command line "CMD":


adb shell am start -n com.android.settings/.TetherSettings && adb shell input keyevent 20 && adb shell input keyevent 20 && adb shell input keyevent KEYCODE_ENTER && sleep 2 && adb shell input keyevent 4


- That will enable USB tethering, which Windows 10 should see a new network is connected.
- Virtual Desktop will prioritize this connection -- you can even turn off wireless after connecting with Virtual Desktop to save on some battery. I recommend putting that adb command in a .bat file to make it super easy to apply.
- To disable USB Tethering run the command below on your Windows CMD:


adb shell svc usb setFunctions


Reference: https://www.reddit.com/r/virtualreality/comments/ybjpke/pico_4_vs_hp_g2_useful_pico_4_pcvr_tips_and_tricks/






#breakingnews #pico4 #usbtethering #msfs

Other Statistics