Layer by Layer - Dual Extrusion Setup

Channel:

Adafruit Industries

Subscribers:

458,000

Published on January 7, 2016 4:04:55 PM ● Video Link: https://www.youtube.com/watch?v=82RkXBzB2Ig

Duration: 12:07

31,459 views

259

Hey guys, in this tutorial we're taking a look at setting up a printing profile for slicing dual extruded parts using Simplify3D and the Flashforge Creator Pro. Specifically, we're going to setup the twisty cover for the NeoPixel headphone project.

NeoPixel Headphones
https://www.youtube.com/watch?v=Len1WyNYQnk
https://learn.adafruit.com/bluetooth-controlled-neopixel-headphones/

3D Printing Projects Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Connect with Noe and Pedro on Social Media:

Noe's Twitter / Instagram: @ecken
Pedro's Twitter / Instagram: @videopixil

-----------------------------------------
Visit the Adafruit shop online - http://www.adafruit.com

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Music by Noe Ruiz: http://soundcloud.com/ecken
-----------------------------------------