Partition and Backup Pandora Partitions / pt.2 - RESTORE
22RESTORE (or, unbrick?) your PG3D !
In Pt 1, you should have made some backups- here, we use them!
@ 0:08 - put images to a exfat formatted usb stick, eject safely, insert into bottom port of PG3D
@ 0:50 - boot PG3D into recovery mode (turn on whilst options button is held in, let go of options button after around 5 seconds). Insert usb-usb cable to top once booted.
@ 1:22 - ADB commands- adb shell, busybox mkdir /udisk, cat /proc/partitions, busybox mount /dev/block/sda /udisk, busybox dd if=/udisk/system.img of=/dev/block/system, wait til command ends- then adb reboot
System is usually the only one you need to restore, data can be done too, if the system still doesn't boot up.
Note: You can potentially screw up your system with this. Please make sure you write the commands in correctly without error! - By following this guide, you yourself are to blame for any true brickages!
#unbrick #brick #pg3d #pandoragames3d #guide