Duration: 32:46

414 views

7

Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/

I've finally assembled something! Up until now I've been printing and have done some gluing but this is the first time I've done any mechanical assembly for this project. The center foot is pretty much done. The outer feet still need some bearings that will be here in the next day or two, as well as motors.

I'll be holding off buying motors for a while. I need to figure out the electronics and I've already spent quite a bit in the last month to be able to start doing assembly. The motors typically come from (or are the same type as) Razor scooters. There are different versions, 12v and 24v, as well as different wattages.