3D Printed R2D2 - Part 30

Channel:
TomsProjects
Subscribers:
1,700
Published on ● Video Link: https://www.youtube.com/watch?v=TX4MTbjvLOM


Duration: 30:01
1,858 views
31

Michael Baddeley R2D2 files:
https://www.patreon.com/mrbaddeley
Wall and infill settings taken from the "Print Guide for R2-D2 v1.2" found here:
https://www.printed-droid.com/files/

Dome rings shown and explained. The important thing to note is that the 'upper ring' gets assembled clockwise and the 'lower ring' gets assembled counter clockwise, when the printed part numbers are facing up.

Once the rings are assembled the dome goes on top, then the upper ring and then the lower ring. There's a printed inset on each ring and they need to be facing each other to make one wider inset all the way around.



Other Videos By TomsProjects


2021-03-103D Printed R2D2 = Part 37
2021-02-263D Printed R2D2 - Part 36
2021-02-123D Printed R2D2 - Part 35
2021-02-043D Printed R2D2 - Part 34
2021-01-28Arkanoid PCB and JAMMA test rig running on arcade monitor
2021-01-283D Printed R2D2 - Part 33
2021-01-243D Printed R2D2 - Part 32
2021-01-223D Printed R2D2 - Part 32
2021-01-13JAMMA test rig update
2021-01-063D Printed R2D2 - Part 31
2020-12-303D Printed R2D2 - Part 30
2020-12-243D Printed R2D2 - Part 29
2020-12-183D Printed R2D2 - Part 28
2020-12-103D Printed R2D2 - Part 27
2020-12-033D Printed R2D2 - Part 26
2020-11-273D Printed R2D2 - Part 25
2020-11-243D Printed R2D2 - Part 24
2020-11-183D Printed R2D2 - Part 22
2020-11-183D Printed R2D2 - Part 23
2020-11-103D Printed R2D2 - Part 21
2020-11-033D Printed R2D2 - Part 20


Tags:
3D Printing
R2D2
Star Wars