Camera Screen Protector For The Z Cam E1 Video Camera - atFolix FX hybrid glass
7In this video I'm attempting to put a screen protector on the display of my Z Cam E1. I seemed to have had a bit of a problem lining up the screen protector with the E1's screen, this was totally my fault.
I think the bubbles on the edges were because I'd not lined up the glass properly and not a fault with the screen protector.
Also. The dust remover wasn't particularly useful and actually left residue on the screen, totally not my fault :) Seriously though, I'd recommend not using this and just clean the screen with some cleaning solution and a microfiber cloth before applying the screen protector.
Using the supplied cloth for a last clean before applying the protector won't be an issue.
You may have noticed some marks on the screen etc. This wasn't anything to do with the screen protector, my screen already had some small marks on it.
Bottom line. This screen protector is easily worth the £8 or so that I payed for it. I would go beyond recommending this screen protector and positively insist that anyone with an E1 should use one. In my search this was the only one I could find, the other things I found were only thin film plastic protectors.
Here's a description of this particular glass screen protector by Atfolix:
Better than glass: unlike real glass or tempered glass, this Glass Screen Protector of plastic is unbreakable and splinter-free - fit for Z-Cam E1 Camera
Maximum protection against scratching (hardness 9H at 500g writing pressure) - this Plastic glass protective film consists of an extremely thin (approx. 0.2 mm) and resistant material
The unique glass / plastic material composition of the Plastic Glass Protective Film provides the highest light permeability and an oleophobic anti-fingerprint coating for your Z-Cam E1 Camera
Particularly strong silicone adhesive layer - with Z-Cam E1 Camera Glass Screen Protector of plastic simple scratches already present on the display simply disappear
Accessory@FoliX - Made in Germany *** Easy to install: the FX-Hybrid-Glass Z-Cam E1 Camera Glass Protector has a similar stiffness to that of real glass and can be installed easily and without bubbles
You can find all my videos about the Z Cam E1 and any videos where I use it at http://www.ZcamE1.com
I'm also very interested in the Z Cam E2 and will be making videos about it in the future. These videos will be available at http://www.ZcamE2.com
Here's the link to where you can buy the screen protector on Amazon. There's also other links to other stuff that I use with my Z Cam E1.
FULL DISCLOSURE ABOUT MY AMAZON LINKS. I WILL RECEIVE AN AFFILIATE COMMISSION FOR ANY PURCHASES USING MY AMAZON LINKS.
Screen Protector: http://geni.us/ZcamE1ScreenProtector
Clippy EM172 Omni Directional Lavalier Microphone by Micbooster.com https://micbooster.com/clippy-microph...
Saramonic Smartrig: http://geni.us/ZVh6
Saramonic SmartRig 2: http://geni.us/SaramonicSmartrig2
Rode Rodelink Wireless System: http://geni.us/Rodelink
Rode VXLR+: http://geni.us/RodeVXLRplus
Olympus Body Cap Lens 9mm: http://geni.us/OlympusBCL9mm
Olympus Body Cap Lens 15mm: http://geni.us/OlympusBCL15mm
Panasonic Lumix H-FS 1442A: http://geni.us/LumixHFS1442A
I hope this video has been helpful.
Thank you very much for watching my video, take care and goodbye now.
Cheers,
Dave.
------------------------------
TAG CLOUD:
Screen Protector For Z Cam E1,
Z Cam E1
Z Cam E1 Carry Case,
Z Cam E1 unboxing,
Z Cam E1 Review,
Z Cam E1,
Z cam E2,
Z Cam,
E1,
E2,
Review,
Unboxing,
External Mic,
External Microphone,
Microphone,
Lens,
Olympus Body Cap Lens,
9mm,
15mm,
Panasonic Lumix 14-42mm,
Saramonic SmartRig,
Phantom Power,
Pre-amplifier,
Pre-amp,
Internal Mics,
internal,
Internal Microphones,
MFT Sensor,
Screen,
Protector,