FSP at Computex showed off a handful of its PC cooling products, besides a large selection of high-end PSUs that it specializes in. The MX09 is a high-end dual aluminium fin-stack CPU air cooler. Although a dual fin-stack (D-type) cooler, the two fin-stacks are designed differently. The one on the left (facing the rear end of your case) has a recess toward the bottom, so it doesn't get impeded by elaborate rear I/O shrouds of today's motherboards. The fin-stack on the right is full length, but its intake fan is a 120 mm and located towards the top, for maximum clearance with the memory. The fan between the two fin-stacks is a 140 mm conveyor. The fins feature a honeycomb bend arrangement for maximum airflow. The cooler uses 7 copper heatpipes that draw heat from the base, spreading it across the two fin-stacks. With its fans in place, the cooler has a height of 160 mm, so it should be compatible with quite a few mid-tower cases. The AP-series of AIO liquid CPU coolers comes in three models based on radiator size—AP42 (420 mm x 140 mm), AP36 (360 mm x 120 mm), and AP24 (240 mm x 120 mm). These use FSP's in-house dual-chamber pump design. Both the MX09 and AP-series support modern CPU socket types, including LGA1700, LGA1200, AM5, and AM4.
↪ ⚠If someone has any problem with this video and want to remove this video from my channel then before give me strike contact me I will definitely delete this video⚠
➡️ contact:- bharat9638050224@gmail.com
0