How to SETUP Dlink DSL-2730U DSL modem router in 1 minute.
1Dlink DSL-2730U Configuration Step by Step:
Please follow the below steps to configure Dlink DSL-2730U modem
Establish a connection between the device and the router via network cable or Wi-Fi (if there’s
a WIFI password you have to check bottom of the router. If you turn the router over, you
should see a sticker, and one of the pieces of information should say something like “Wi-Fi
Password” or “WPA passcode.”)
Open a browser and type 192.168.1.1 in the address bar
You will be prompted to enter Username: admin and Password: admin
After logging in, Device Info page will be displayed.
Click Advanced Setup then under DSL ATM interface configuration table click Add
In ATM PVC configuration enter VPI and VCI , VPI should 0 if DSP is Ogero and 8 if DSP is GDS
while VCI should be 35
Select Path 0 option as DSL Latency then EOA as DSL Link Type
Keep Default Connection Mode then select LLC/SNAP-BRIDGING as Encapsulation Mode
Keep default configuration for Service Category and IP QoS then click Apply/Save
Now click WAN service Submenu under Advanced Setup then click Add
Select correct created ATM interface and Click Next
Select PPP over Ethernet (PPPoE) as WAN service type then click Next
In PPP Username and password type ADSL credentials and keep other defaults settings as
mentioned in the screenshot then click Next
When routing default Gateway page opens , click next
Select DNS Server Interface from available WAN Interfaces” and click the Next button
In WAN Setup Summary page , Click Apply/Save
Expand Wireless then click Basic and make sure wireless is enabled
In SSID textbox type Wireless Name then click Apply/Save
You may need to connect your device to new name using old password
Under Wireless , click Security
Under Manual Setup AP , select the predefined SSID and Make sure Network Authentication is
WPA-Personal or WPA2-pesonal
In WPA/WAPI Passphrase type Wi-Fi Password and click Apply/Save (safest passwords are long
and contain at least 8 digits of mixed letters, and numbers)